SEAT EXEO 1.8L 20V TURBO 110kW/150HP ME7.5

ECU BOSCH ME7.5 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

ECU 数据库SEAT › SEAT EXEO 1.8L 20V TURBO 110kW/150HP ME7.5

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 3 固件版本

车辆数据

品牌SEAT
型号EXEO
发动机1.8L 20V TURBO 110kW/150HP ME7.5
原厂功率150 CV / 11 kW
排量1800 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.5
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Boost pressure limiter 4
  • Boost pressure limiter 5
  • Desired engine load calculation
  • Injection at part load
  • Lambda enrichment for components protection
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Optimal engine moment
  • P
  • Max boost pressure control
  • Driver torque request
  • Throttle angle management

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
0261S046561037500825 1.42.0153R0906032 0004 BOSCH ME7.5
0261S046561037399152 1.42.0143R0906032 0003 BOSCH ME7.5
0261S058771037502779 1.42.0113R0906032A 0010 BOSCH ME7.5

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop