SEAT ATECA (KH7/5FP) 1.6L 16V TDI 85kW/114HP DCM6.2V

ECU DELPHI DCM6.2V · 116 CV (85 kW) · 1600 cc · Diesel sovralimentato

ECU 数据库SEAT › SEAT ATECA (KH7/5FP) 1.6L 16V TDI 85kW/114HP DCM6.2V

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 1 固件版本

车辆数据

品牌SEAT
型号ATECA (KH7/5FP)
发动机1.6L 16V TDI 85kW/114HP DCM6.2V
原厂功率116 CV / 85 kW
排量1600 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商DELPHI
型号DCM6.2V
存储 / EPROMMicro BGA ST SPC5674 - 32768 Kbit -400000

可用的调校选项:

  • Base timing
  • Base timing 2
  • Boost pressure limit control
  • Boost limiter correction for APS/BPS sensor
  • Boost pressure limiter for ECT sensor
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 4
  • Maximum torque limitation at clutch
  • EGR valve control
  • EGR valve control 2
  • Max accepted exhaust gas temperature value before turbine
  • Idle torque management
  • Injection opening time related to inj. pressure
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Torque limiter for diagnostic
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Speed limiter
  • Specific injection pressure limiter
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Q
  • Specific air mass charge 3
  • Air mass flow
  • Driver torque request
  • Driver torque request 2
  • Setpoint maximum turbocharger speed
  • Maximum engine speed threshold for activating the turbo boost smoke limitation
  • Torque limiter for EFT sensor - negative correction
  • Torque limit table for EOT sensor
  • Torque limiter for turbocharger temperature
  • Torque limit table for ECT sensor - negative correction
  • Torque model - torque to fuel quantity conversion
  • Torque model - torque to fuel quantity conversion 2
  • Turbocharger volumetric efficiency

固件标识 (1)

硬件号软件号 (chip)版本升级软件ECU
DGTE04L906056TH 1.00.01104L906056TH 6987 DELPHI DCM6.2V

ECU 说明

Microprocessor BGA SPC5674 This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata