ECU 数据库 ›
SEAT › SEAT ARONA (KJ) 1.6L L4 16V TDI 85kW/114HP DCM6.2V
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 2 固件版本
车辆数据
| 品牌 | SEAT |
| 型号 | ARONA (KJ) |
| 发动机 | 1.6L L4 16V TDI 85kW/114HP DCM6.2V |
| 原厂功率 | 116 CV / 85 kW |
| 排量 | 1600 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | DELPHI |
| 型号 | DCM6.2V |
| 存储 / EPROM | Micro BGA ST SPC5674 - 32768 Kbit -400000 |
可用的调校选项:
- Base timing
- Base timing 2
- Boost pressure limit control
- Boost limiter correction for APS/BPS sensor
- Boost pressure limiter for ECT sensor
- Boost pressure
- Boost pressure 2
- Boost pressure 4
- Maximum torque limitation at clutch
- EGR valve control
- Max accepted exhaust gas temperature value before turbine
- Idle torque management
- Injection opening time related to inj. pressure
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Torque limiter for diagnostic
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Q
- Specific air mass charge 3
- Air mass flow
- Driver torque request
- Setpoint maximum turbocharger speed
- Maximum engine speed threshold for activating the turbo boost smoke limitation
- Torque limiter for EFT sensor - negative correction
- Torque limit table for EOT sensor
- Torque limiter for turbocharger temperature
- Torque limit table for ECT sensor - negative correction
- Torque model - torque to fuel quantity conversion
- Torque model - torque to fuel quantity conversion 2
- Turbocharger volumetric efficiency
固件标识 (2)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| DGTA | 04L906056LM |
1.00.011 | 04L906056LM 7826 |
DELPHI DCM6.2V |
| DGTA | 04L906056LM |
1.00.020 | 04L906056LM 5933 |
DELPHI DCM6.2V |
ECU 说明
Microprocessor BGA SPC5674 This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata
