SAIC MG HS Mk1 1.5L 16V T-GDi 119kW/160HP MED17.8.10.1 — ECU BOSCH MED17.8.10.1

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 2 固件版本

获取该车辆的文件

可用的调校选项:

Base timing
Advance at idle speed
Optimal spark timing/MBT
Knock correction advance max
Boost pressure
Boost pressure 2
Desired engine load calculation
Exhaust gas temperature
Factor to correct fuel delivery system
Engine idle vs. ECT sensor
Torque limiter
Lambda enrichment for components protection
Lambda fat-running limit for component protection
Lambda correction for exhaust manifold temperature
RPM Limiter
RPM limit for ECT sensor
RPM limit for EOT sensor
Lambda driver wish
Knock detection factor
Lookup table minimum defined efficiency
Throttle air mass flow calculation
Manifold absolute pressure time delay
Characteristic manifold absolute pressure time constant of the LRS
Max torque profile
Optimal engine moment
Relative permissible torque from the pedal position in torque limitation
Relative permissible torque from the pedal position in torque limitation - sport/race mode
Driver torque request
Torque limiter for selected gear
Torque limiter for for reverse gear
Throttle angle management
Turbocharger volumetric efficiency
Wastegate duty-cycle

硬件号	软件号 (chip)	版本	升级软件	ECU
—	F01R0AD6A6	1.94.003	E71H05AMRC15MS05	BOSCH MED17.8.10.1
F01R00DH5E	F01R0AD6FY	1.94.013	E71H05AMRC15DS06	BOSCH MED17.8.10.1

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

Microprocessor TC1782 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

The Genius OBD + Bench € 2.500 购买