ECU 数据库 ›
SAAB › SAAB 9-5 SERIES Mk1 1.9L 16V TiDS 110kW/148HP EDC16C39
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 10 固件版本
车辆数据
| 品牌 | SAAB |
| 型号 | 9-5 SERIES Mk1 |
| 发动机 | 1.9L 16V TiDS 110kW/148HP EDC16C39 |
| 原厂功率 | 150 CV / 11 kW |
| 排量 | 1900 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC16C39 |
| 存储 / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
可用的调校选项:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes
- Max injection limit
- Max injection limit - limp mode
- Injection correction for IAT sensor
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Torque limiter 3
- Boost pressure deviation limits for basic charge air pressure
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Driver torque request
- CAT downstream temperature sensor characterization
- CAT upstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
固件标识 (10)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | 1037376165P505_S30 |
1.67.014 | C5OMS0D0 |
BOSCH EDC16C39 |
| — | 1037379077P505_S30 |
1.67.038 | C5OMS0G0 |
BOSCH EDC16C39 |
| — | 1037393165P505_S32 |
1.67.017 | E5OMS010 |
BOSCH EDC16C39 |
| — | 1037380392P505_S31 |
1.67.018 | D5OMS020 |
BOSCH EDC16C39 |
| — | 1037379077P505_S30 |
1.67.029 | C5OMS0G0 |
BOSCH EDC16C39 |
| — | 1037A50305P505_S32 |
1.67.022 | E5OM0020 |
BOSCH EDC16C39 |
| — | 1037A50379P505_S32 |
1.67.007 | E5OM0040 |
BOSCH EDC16C39 |
| — | 1037387661P505_S31 |
1.67.015 | D5OMS030 |
BOSCH EDC16C39 |
| — | 1037380392P505_S31 |
1.67.019 | D5OMS020 |
BOSCH EDC16C39 |
| — | 1037A50380P505_S32 |
1.67.002 | E5OAS030 |
BOSCH EDC16C39 |
车辆技术说明
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU located in the engine bay on the passenger's side. Difficulty: easy
ECU 说明
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
可用附加模块
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
