ROVER 75 2.0L 16V CDT 85kW/116HP DDE 4.0

ECU BOSCH DDE 4.0 · 116 CV (85 kW) · 2000 cc · Diesel sovralimentato

ECU 数据库ROVER › ROVER 75 2.0L 16V CDT 85kW/116HP DDE 4.0

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 16 固件版本

车辆数据

品牌ROVER
型号75
发动机2.0L 16V CDT 85kW/116HP DDE 4.0
原厂功率116 CV / 85 kW
排量2000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号DDE 4.0
存储 / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

可用的调校选项:

  • Boost pressure limiter
  • Boost pressure
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Air mass flow
  • Overboost timing

固件标识 (16)

硬件号软件号 (chip)版本升级软件ECU
77855411037351065 1.03.0208633 BOSCH DDE 4.0
77855411037351065 1.03.0178637 BOSCH DDE 4.0
77855411037351065 1.03.0008639 BOSCH DDE 4.0
77855411037351065 1.03.0198635 BOSCH DDE 4.0
77855411037351065 1.03.0118633 BOSCH DDE 4.0
77855411037351065 1.03.0128633 BOSCH DDE 4.0
77855411037351065 1.03.0148633 BOSCH DDE 4.0
77880531037351514 1.03.001B136 BOSCH DDE 4.0
77880531037781514 1.03.013A132 BOSCH DDE 4.0
77880531037351514 1.03.002A132 BOSCH DDE 4.0
77880531037351514 1.03.006B134 BOSCH DDE 4.0
77929381037361846 1.03.001D245 BOSCH DDE 4.0
7792938123456789 1.03.008D245 BOSCH DDE 4.0
77929380123456789 1.03.002D245 BOSCH DDE 4.0
77929381037361846 1.03.002D246 BOSCH DDE 4.0
77929380123456789 1.03.000D246 BOSCH DDE 4.0

ECU 说明

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BT. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.