RENAULT MASTER 3 2.3L dCi 107kW/143HP SID321

ECU CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL · 145 CV (107 kW) · 2300 cc · Diesel sovralimentato

ECU 数据库RENAULT › RENAULT MASTER 3 2.3L dCi 107kW/143HP SID321

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 6 固件版本

车辆数据

品牌RENAULT
型号MASTER 3
发动机2.3L dCi 107kW/143HP SID321
原厂功率145 CV / 107 kW
排量2300 cc
燃料Diesel sovralimentato
车辆类型LCV

ECU

制造商CONTINENTAL-SIEMENS-VDO
型号SID321_CONTINENTAL
存储 / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbite

可用的调校选项:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • Maximum torque limitation at clutch
  • Compressor pressure ratio limit for pumping and speed
  • Effective engine torque setpoint for safety
  • Exhaust gas temperature value before turbine in regeneration mode
  • Exhaust gas temperature value before turbine in regular injection mode
  • Max torque correction factor for APS sensor
  • Max torque correction factor for APS sensor in aftertreatment modes
  • Max torque correction factor for soot mass
  • Max torque correction factor for soot mass in aftertreatment modes
  • Max torque correction factor for IAT sensor
  • Max torque correction factor for IAT sensor in aftertreatment modes
  • Basic torque management at engine cranking
  • Injection efficiency
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 3
  • L
  • Torque limiter
  • Torque limiter in full load
  • Torque limiter in Eco mode
  • Smoke limiter
  • Smoke limiter in aftertreatment modes
  • RPM Limiter
  • RPM limiter - AT
  • RPM limit for ECT sensor
  • Maximum absolute effective torque
  • Max exhaust gas temperature value before turbine in regeneration mode
  • Max exhaust gas temperature value before turbine in regular injection mode
  • Max force table for force to powertrain setpoint conversion
  • Specific injection pressure limiter
  • Specific injection pressure limiter in aftertreatment modes
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Air mass flow
  • Driver torque request
  • Driver torque request Dynamic mode
  • Torque value tolerance between level 1 and level 2
  • Torque value tolerance between level 1 and level 2 - AT
  • Torque limiter for the APS/BPS in aftertreatment modes
  • Torque limiter in aftertreatment modes
  • Torque limiter in aftertreatment modes 2
  • Torque limiter for EFT sensor
  • Torque limiter in recovery mode
  • Torque model - fuel quantity to torque conversion
  • Torque model - fuel quantity to torque conversion 2
  • Torque model - fuel quantity to torque conversion in aftertreatment modes
  • Torque model - torque to fuel quantity conversion
  • Torque model - torque to fuel quantity conversion - particulate regeneration mode

固件标识 (6)

硬件号软件号 (chip)版本升级软件ECU
237010374V 1.83.010237610377V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237010374V 1.83.010237610393V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237010374V 1.83.010237610375V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237011330V 1.83.009237611346V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237010374V 1.83.009237610390V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237018559S 1.83.010237618812S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL

ECU 说明

Microprocessor TC297TP_128 This Setting File can be used for serial system NewGenius.