查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 7 固件版本
车辆数据
| 品牌 | RENAULT |
| 型号 | MASTER 3 |
| 发动机 | 2.3L dCi 100kW/134HP SID309 |
| 原厂功率 | 136 CV / 1 kW |
| 排量 | 2300 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | LCV |
ECU
| 制造商 | CONTINENTAL-SIEMENS-VDO |
| 型号 | SID309 |
| 存储 / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
可用的调校选项:
- Boost pressure limiter
- BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
- Boost pressure in aftertreatment modes
- Boost pressure in regular injection mode
- Maximum torque limitation at clutch
- Effective engine torque setpoint
- Max accepted exhaust gas temperature value before turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Engine torque limit for transmission protection
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor in aftertreatment modes
- Basic torque management at engine cranking
- Injection opening time related to inj. pressure
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Minimum filtered torque to allow learning
- Maximum particulate filter upstream temperature for diagnosis
- Specific injection pressure limiter
- Specific injection pressure limiter in aftertreatment modes
- Power limit torque table
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Mass air flow - gear 1 (N or R)
- Air mass flow
- Mass air flow - gear 3
- Mass air flow - gear 4
- Mass air flow - gear 5
- Mass air flow - gear 6
- Air mass flow in aftertreatment modes
- Maximum temperature before turbine for diagnosis
- Torque limiter for EFT sensor
- Torque limiter for intake manifold pressure
- Torque limiter for intake manifold pressure in regeneration mode
- Torque model - fuel quantity to torque conversion
- Torque model - torque to fuel quantity conversion
固件标识 (7)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| 4246R | 5093R |
1.83.003 | 7104R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.023 | 7112R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.004 | 5951R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.030 | 5616R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.012 | 5953R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.003 | 5956R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.077 | 7106R |
CONTINENTAL-SIEMENS-VDO SID309 |
ECU 说明
MICRO Infineon Tricore TC1767 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
