ECU 数据库 ›
RENAULT › RENAULT ESPACE 5 1.6L 16V 4L dCi 96kW/129HP EDC17C84
查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 3 固件版本
车辆数据
| 品牌 | RENAULT |
| 型号 | ESPACE 5 |
| 发动机 | 1.6L 16V 4L dCi 96kW/129HP EDC17C84 |
| 原厂功率 | 131 CV / 96 kW |
| 排量 | 1600 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC17C84 |
| 存储 / EPROM | MICRO ST TRICORE - 20480 Kbit - 280000 |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure in aftertreatment modes
- Maximum torque limitation at clutch
- Effective engine torque setpoint for safety
- Max accepted exhaust gas temperature value after turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Max accepted exhaust gas temperature value at particulate sensor
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor 2
- Max torque correction factor for IAT sensor in aftertreatment modes
- Max torque correction factor for IAT sensor in aftertreatment modes 2
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Basic torque management at engine cranking 3
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes 3
- Torque limiter
- Torque limiter for diagnostic
- Maximum absolute effective torque in ECO mode
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Maximum indicated torque - safety condition
- Maximum indicated torque - safety condition 2
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Turbine temperature maximum value
- Specific injection pressure limiter
- Specific injection pressure limiter 4
- Specific injection pressure limiter in aftertreatment modes
- Specific injection pressure limiter for diagnostics
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific injection pressure in aftertreatment modes 2
- Driver torque request
- Driver torque request Sport mode
- Maximum temperature before turbine for diagnosis
- Temperature before turbine setpoint during npu, spu and injection mode
- Torque limiter for EFT sensor
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Torque model - fuel quantity to torque conversion
- Torque model - fuel quantity to torque conversion 2
- Torque model - fuel quantity to torque conversion in aftertreatment modes
- Torque model - torque to fuel quantity conversion
固件标识 (3)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
| — | 10SW006615 |
1.94.007 | 10SW007967 |
BOSCH EDC17C84 |
| — | 10SW037470 |
1.94.024 | 10SW037470 |
BOSCH EDC17C84 |
| — | 1037552653 |
1.94.007 | 1037553517 |
BOSCH EDC17C84 |
ECU 说明
Microprocessor TC1782 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata