PORSCHE CAYMAN (987) 3.4L S 217kW/291HP ME7.8.1

ECU BOSCH ME7.8.1 · 295 CV (217 kW) · 3400 cc · Benzina aspirato

ECU 数据库PORSCHE › PORSCHE CAYMAN (987) 3.4L S 217kW/291HP ME7.8.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 26 固件版本

车辆数据

品牌PORSCHE
型号CAYMAN (987)
发动机3.4L S 217kW/291HP ME7.8.1
原厂功率295 CV / 217 kW
排量3400 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.8.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Base timing
  • Minimum advance allowed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Factor to correct fuel delivery system 2
  • HFM/HLM air flow high limit
  • HFM/HLM air flow low limit
  • Lambda enrichment for components protection
  • Torque limiter at high EGT
  • Lambda efficiency
  • RPM Limiter
  • RPM limiter in Park position
  • Lambda driver wish
  • Knock detection factor
  • MAF sensor calibration
  • Maximum indicated torque
  • Maximum ignition delay allowed for knock limiter intervention
  • Maximum possible engine charge
  • Throttle air mass flow calculation
  • Minimum engine air charge value
  • Number of injections considered for knock limitation
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode 2
  • Driver wish
  • Driver torque request
  • Driver torque request for reverse gear
  • Driver torque request Sport mode
  • Maximum threshold for detecting engine knock - bank 1
  • Maximum threshold for detecting engine knock - bank 2
  • Throttle angle management
  • Variable intake pulsation correction

固件标识 (26)

硬件号软件号 (chip)版本升级软件ECU
02612079871037379149 1.27.0060041900007415C0E BOSCH ME7.8.1
02612079871037369642 1.27.0040041900007335C41 BOSCH ME7.8.1
02612079871037379149 1.27.0060041900007605C1D BOSCH ME7.8.1
02612079871037379149 1.27.0070041900007415C08 BOSCH ME7.8.1
02612079871037379149 1.27.0070041900007605C19 BOSCH ME7.8.1
02612079871037369642 1.27.0030041900007335C4U BOSCH ME7.8.1
02612079871037369642 1.27.0090041900007335C4T BOSCH ME7.8.1
02612079871037379149 1.27.0050041900007605C1E BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007335C49 BOSCH ME7.8.1
02612079871037379149 1.27.0080041900007605C11 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007335C42 BOSCH ME7.8.1
02612079871037379149 1.27.0090041900007415C09 BOSCH ME7.8.1
02612079871037379149 1.27.0040041900007605C12 BOSCH ME7.8.1
02612079871037379149 1.27.0180041900007605C18 BOSCH ME7.8.1
02612079871037369642 1.27.0660041900007335C48 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007335C4T BOSCH ME7.8.1
02612083001037379150 1.27.00700419100A8615C13 BOSCH ME7.8.1
02612083001037379150 1.27.00400419100A8615C23 BOSCH ME7.8.1
02612083001037379150 1.27.00300419100A8505C04 BOSCH ME7.8.1
02612083001037369620 1.27.01500419100A8225C43 BOSCH ME7.8.1
02612083001037369620 1.27.00400419100A8225C33 BOSCH ME7.8.1
02612083001037379150 1.27.01200419100A8427A29 BOSCH ME7.8.1
02612083001037369620 1.27.00600419100A8225C44 BOSCH ME7.8.1
02612083001037379150 1.27.00900419100A8615C24 BOSCH ME7.8.1
02612083001037379150 1.27.00800419100A8615B34 BOSCH ME7.8.1
02612083001037379150 1.27.00900419100A8505C03 BOSCH ME7.8.1

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop