PORSCHE CAYENNE (9YA) 3.0L V6 24V TURBO E-HYBRID 340kW/456HP MG1CS002

ECU BOSCH MG1CS002 · 462 CV (34 kW) · 3000 cc · Hybrid

ECU 数据库PORSCHE › PORSCHE CAYENNE (9YA) 3.0L V6 24V TURBO E-HYBRID 340kW/456HP MG1CS002

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 4 固件版本

车辆数据

品牌PORSCHE
型号CAYENNE (9YA)
发动机3.0L V6 24V TURBO E-HYBRID 340kW/456HP MG1CS002
原厂功率462 CV / 34 kW
排量3000 cc
燃料Hybrid
车辆类型Auto

ECU

制造商BOSCH
型号MG1CS002
存储 / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

可用的调校选项:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Optimal spark timing/MBT 2
  • Lambda correction for engine temperature after starting
  • Compression ratio for turbocharger protection
  • Compression ratio limiting for compressor depending on IAT sensor
  • Exhaust gas temperature
  • Factor for reducing maximum filling
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter 5
  • Torque limiter 6
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Engine speed limit temperature based
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Max torque profile - MT
  • Optimal engine moment
  • Power limit torque table
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Driver torque request Sport mode
  • Turbocharger volumetric efficiency

固件标识 (4)

硬件号软件号 (chip)版本升级软件ECU
1.02.0109Y0907559AE 0002 BOSCH MG1CS002
1.02.0069Y0907559B 0004 BOSCH MG1CS002
1.02.0139Y0907559J 0003 BOSCH MG1CS002
1.02.0099Y0907551A 0005 BOSCH MG1CS002

ECU 说明

Microprocessor BGA FREESCALE SPC57xxx This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata