PORSCHE CAYENNE (9PA) 4.5L V8 32V S 250kW/335 HP ME7.1.1

ECU BOSCH ME7.1.1 · 340 CV (25 kW) · 4500 cc · Benzina aspirato

ECU 数据库PORSCHE › PORSCHE CAYENNE (9PA) 4.5L V8 32V S 250kW/335 HP ME7.1.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 20 固件版本

车辆数据

品牌PORSCHE
型号CAYENNE (9PA)
发动机4.5L V8 32V S 250kW/335 HP ME7.1.1
原厂功率340 CV / 25 kW
排量4500 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.1.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Speed limiter
  • Specific air mass charge 2
  • Air mass flow

固件标识 (20)

硬件号软件号 (chip)版本升级软件ECU
02612076961037382133 1.21.0088SE4ASN7000 0175 BOSCH ME7.1.1
02612076961037368313 1.21.0078SLVASN4000 0052 BOSCH ME7.1.1
02612076961037382182 1.21.0098SE2ASN5000 0182 BOSCH ME7.1.1
02612076961037367700 1.21.0078SLVASN3000 0042 BOSCH ME7.1.1
02612076961037363308 1.21.018022906032BT 0041 BOSCH ME7.1.1
02612076961037371766 1.21.0078SE4AKN0000 0133 BOSCH ME7.1.1
02612076961037371180 1.21.0078SLVASN5000 0118 BOSCH ME7.1.1
02612076961037371185 1.21.0078SE2ASN4000 0114 BOSCH ME7.1.1
02612076961037370141 1.21.0068SE4ASN5000 0079 BOSCH ME7.1.1
02612076961037371162 1.21.0078SE2AKN0000 0132 BOSCH ME7.1.1
02612076961037381654 1.21.0088SLVAKN1000 0164 BOSCH ME7.1.1
02612076961037375784 1.21.0098SLVASN6000 0144 BOSCH ME7.1.1
02612076961037371184 1.21.0138SE4ASN6000 0116 BOSCH ME7.1.1
02612076961037382183 1.21.0098SE4MSN2000 0176 BOSCH ME7.1.1
02612076961037367552 1.21.0238SE4ASN2000 0018 BOSCH ME7.1.1
02612076961037371186 1.21.0078SLVAKN0000 0134 BOSCH ME7.1.1
02612076961037368314 1.00.0178SE4ASN3000 0051 BOSCH ME7.1.1
02612076961037369587 1.21.0058SE4MSN0000 0049 BOSCH ME7.1.1
02612076961037368315 1.00.0048SE2ASN3000 0044 BOSCH ME7.1.1
02612076961037366887 1.21.0198SE4ASN1000 0014 BOSCH ME7.1.1

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop