PORSCHE 996 3.6L CARRERA 4S 235kW/316HP ME7.8 min

ECU BOSCH ME7.8 min · 320 CV (235 kW) · 3600 cc · Benzina aspirato

ECU 数据库PORSCHE › PORSCHE 996 3.6L CARRERA 4S 235kW/316HP ME7.8 min

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 30 固件版本

车辆数据

品牌PORSCHE
型号996
发动机3.6L CARRERA 4S 235kW/316HP ME7.8 min
原厂功率320 CV / 235 kW
排量3600 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.8 min
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Base timing
  • Minimum advance allowed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • HFM/HLM air flow high limit
  • HFM/HLM air flow low limit
  • Lambda enrichment for components protection
  • Lambda efficiency
  • RPM Limiter
  • RPM limiter in Park position
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Maximum ignition delay allowed for knock limiter intervention
  • Throttle air mass flow calculation
  • Minimum engine air charge value
  • Number of injections considered for knock limitation
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation 3
  • Driver wish
  • Driver torque request
  • Driver torque request for reverse gear
  • Maximum threshold for detecting engine knock - bank 1
  • Maximum threshold for detecting engine knock - bank 2
  • Throttle angle management
  • Variable intake pulsation correction

固件标识 (30)

硬件号软件号 (chip)版本升级软件ECU
02612065791037350598 1.27.0080041610046303613 BOSCH ME7.8 min
02612065791037350598 1.27.0100041610043103639 BOSCH ME7.8 min
02612065791037350598 1.27.0060041610046307619 BOSCH ME7.8 min
02612065791037350598 1.27.0090041610046203614 BOSCH ME7.8 min
02612065791037350598 1.27.0030041610046303623 BOSCH ME7.8 min
02612065791037350598 1.27.0140041610042103643 BOSCH ME7.8 min
02612065791037350598 1.27.0070041610043103638 BOSCH ME7.8 min
02612065791037350598 1.27.0150041610047203619 BOSCH ME7.8 min
02612065791037350598 1.27.0080041610046303603 BOSCH ME7.8 min
02612065791037350598 1.27.0050041610047203612 BOSCH ME7.8 min
02612065791037350598 1.27.0030041610042103633 BOSCH ME7.8 min
02612065791037350598 1.27.0060041610047203629 BOSCH ME7.8 min
02612065791037350598 1.27.0080041610043103629 BOSCH ME7.8 min
02612065791037350598 1.27.0070041610046303604 BOSCH ME7.8 min
02612065791037350598 1.27.0090041610043103619 BOSCH ME7.8 min
02612065791037350598 1.27.0060041610047203611 BOSCH ME7.8 min
02612065791037350598 1.27.0040041610047207617 BOSCH ME7.8 min
02612065791037350598 1.27.0060041610047207627 BOSCH ME7.8 min
02612065791037350598 1.27.0150041610046203613 BOSCH ME7.8 min
02612065791037350598 1.27.0090041610043103622 BOSCH ME7.8 min
02612065791037350598 1.27.0080041610047207616 BOSCH ME7.8 min
02612065791037350598 1.27.0140041610042103624 BOSCH ME7.8 min
02612065791037350598 1.27.0130041610043103639 BOSCH ME7.8 min
02612065791037350598 1.27.0080041610042103623 BOSCH ME7.8 min
02612065791037350598 1.27.0070041610047203628 BOSCH ME7.8 min
02612065791037350598 1.27.0140041610043103619 BOSCH ME7.8 min
02612065791037350598 1.27.0060041610046303614 BOSCH ME7.8 min
02612065791037350598 1.27.0290041610047203618 BOSCH ME7.8 min
02612065791037350598 1.27.0200041610043103648 BOSCH ME7.8 min
02612065791037350598 1.27.0100041610043103641 BOSCH ME7.8 min

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial programming system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!