PORSCHE 991.2 3.0L CARRERA GTS 331kW/444HP CONTINENTAL SDI21.X — ECU CONTINENTAL-SIEMENS-VDO SDI21.X

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 11 固件版本

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件

车辆数据

品牌	PORSCHE
型号	991.2
发动机	3.0L CARRERA GTS 331kW/444HP CONTINENTAL SDI21.X
原厂功率	450 CV / 331 kW
排量	3000 cc
燃料	Benzina sovralimentato
车辆类型	Auto

ECU

制造商	CONTINENTAL-SIEMENS-VDO
型号	SDI21.X
存储 / EPROM	MICRO INFINEON TRICORE - 32768 Kbit - 400000

可用的调校选项:

Base timing
Base timing 2
Lambda/AFR full load/WOT
Advance correction for IAT sensor
Boost pressure
Desired engine load calculation
Lambda correction
Intake pressure protection
Torque limiter 2
Basic value Lambda sensor
Torque limiter
Lambda enrichment for components protection
RPM Limiter
RPM Limiter 2
Knock detection factor
Speed limiter
Speed limiter 2
Speed limiter 3
Max torque profile
Optimal engine moment
Maximum pressure ratio limit depending on temperature
Pop/blow off valve offset - close model
Pop/blow off valve offset - open model
Driver torque request

固件标识 (11)

硬件号	软件号 (chip)	版本	升级软件	ECU
9P1906024AP	W22H2030KED04	1.96.003	3402	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024AR	W22H2030KUD04	1.96.003	3404	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024AS	W22H2030KUM04	1.96.005	3405	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024AT	W22H2030K5D04	1.96.004	3406	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024BD	W22H2030KED10	1.96.008	3570	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024BE	W22H2030KEM10	1.96.002	3571	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024BF	W22H2030KUD10	1.96.006	3572	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024BG	W22H2030KUM10	1.96.010	3573	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024BH	W22H2030K5D10	1.96.003	3574	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906024BH	W22H2030K5D10	1.96.006	3574	CONTINENTAL-SIEMENS-VDO SDI21.X
9P1906034B	W22P0030KOD20	1.96.009	3667	CONTINENTAL-SIEMENS-VDO SDI21.X

ECU 说明

MICRO Infineon Tricore TC1791 WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata