PORSCHE 991.1 4.0L GT3 RS 368kW/494HP MED17.1.11

ECU BOSCH MED17.1.11 · 500 CV (368 kW) · 4000 cc · Benzina aspirato

ECU 数据库PORSCHE › PORSCHE 991.1 4.0L GT3 RS 368kW/494HP MED17.1.11

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 16 固件版本

车辆数据

品牌PORSCHE
型号991.1
发动机4.0L GT3 RS 368kW/494HP MED17.1.11
原厂功率500 CV / 368 kW
排量4000 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.1.11
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Driver torque request 2
  • Torque limiter for selected gear
  • Throttle angle management

固件标识 (16)

硬件号软件号 (chip)版本升级软件ECU
1.94.00299161869701 3377 BOSCH MED17.1.11
1.94.00699161869016 3623 BOSCH MED17.1.11
1.94.00699161866304 3144 BOSCH MED17.1.11
1.94.00499161865817 3672 BOSCH MED17.1.11
1.94.00399161866308 3650 BOSCH MED17.1.11
1.94.00499161869201 3372 BOSCH MED17.1.11
1.94.00699161867716 3630 BOSCH MED17.1.11
1.94.01799161866103 3014 BOSCH MED17.1.11
1.94.00799161866404 3145 BOSCH MED17.1.11
1.94.00499161868817 3679 BOSCH MED17.1.11
1.94.01599161866203 3015 BOSCH MED17.1.11
1.94.01099161866208 3649 BOSCH MED17.1.11
1.94.00799161866104 3142 BOSCH MED17.1.11
1.94.00399161866403 3017 BOSCH MED17.1.11
1.94.00799161866204 3143 BOSCH MED17.1.11
1.94.00399161865816 3626 BOSCH MED17.1.11

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop