查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 4 固件版本
车辆数据
| 品牌 | OPEL / SATURN / VAUXHALL |
| 型号 | CORSA D |
| 发动机 | 1.0L 12V 44kW/59HP ME7.6.2 |
| 原厂功率 | 60 CV / 44 kW |
| 排量 | 1000 cc |
| 燃料 | Benzina aspirato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | ME7.6.2 |
| 存储 / EPROM | HYBRID ECU - 6144Kbit - 0xC0000 |
可用的调校选项:
- Base timing
- Optimal spark timing/MBT
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Exhaust gas temperature
- HFM - pulsation correction factor
- HFM/HLM air flow low limit
- Torque limiter in full load
- Lambda enrichment for components protection
- RPM Limiter
- RPM limiter - AT
- RPM limiter in limp mode
- RPM Gear Shift
- RPM limit for EOT sensor
- Lambda driver wish
- Knock detection factor
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Throttle air mass flow calculation
- Maximum throttle angle opening for a given RPM
- Optimal engine moment
- Offset tolerance depending on permissible torque
- Relative permissible torque from the pedal position in torque limitation
- Driver torque request
- Driver torque request for low speed
- Driver torque request for low speed in Sport mode
- Driver torque request - MT
- Driver torque request Sport mode - MT
- Driver torque request for reverse gear
- Driver torque request Sport mode
- Throttle angle management
固件标识 (4)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| 0261208939 | 1037381909 |
1.00.009 | 43070501 |
BOSCH ME7.6.2 |
| 0261208939 | 1037387915 |
1.00.005 | 43070503 |
BOSCH ME7.6.2 |
| 0261208939 | 1037380974 |
1.00.023 | 43070301 |
BOSCH ME7.6.2 |
| 0261208939 | 1037396387 |
1.00.016 | 43070601 |
BOSCH ME7.6.2 |
车辆技术说明
ECU located in the engine bay behind/close to the battery. Difficulty: easy
OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.
ECU 说明
HYBRID ECU! This ECU does not have any accessible chip, it is not possible to use any eprom reader. In order to modify this ECU it is necessary to use the serial system. This Setting File can be used for serial system NewGenius.
