MITSUBISHI ASX 1.6L 16V HDI 85kW/114HP SID807EVO

ECU CONTINENTAL-SIEMENS-VDO SID807EVO · 116 CV (85 kW) · 1600 cc · Diesel sovralimentato

ECU 数据库MITSUBISHI › MITSUBISHI ASX 1.6L 16V HDI 85kW/114HP SID807EVO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 5 固件版本

车辆数据

品牌MITSUBISHI
型号ASX
发动机1.6L 16V HDI 85kW/114HP SID807EVO
原厂功率116 CV / 85 kW
排量1600 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商CONTINENTAL-SIEMENS-VDO
型号SID807EVO
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • Load / throttle position reference
  • Exhaust gas temperature value before turbine in regeneration mode
  • Exhaust gas temperature value before turbine in regular injection mode
  • Basic torque management at engine cranking
  • Injection opening time related to inj. pressure
  • J
  • Torque limiter 2
  • Torque limiter
  • Intake manifold pressure
  • Throttle air mass flow calculation
  • Throttle air mass flow calculation 2
  • Max torque profile
  • Specific injection pressure limiter
  • Specific injection pressure
  • Driver torque request for high speed
  • Driver torque request for medium speed
  • Driver torque request for low speed
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor
  • Variable geometry duty cycle limit

固件标识 (5)

硬件号软件号 (chip)版本升级软件ECU
96754115809678226080 1.83.0069692020480 CONTINENTAL-SIEMENS-VDO SID807EVO
96754115809678226080 1.83.0029692246780 CONTINENTAL-SIEMENS-VDO SID807EVO
96754115809678226080 1.83.0109692247180 CONTINENTAL-SIEMENS-VDO SID807EVO
96754115809678226080 1.83.0059692020480 CONTINENTAL-SIEMENS-VDO SID807EVO
96754115809678226080 1.83.0229692020380 CONTINENTAL-SIEMENS-VDO SID807EVO

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop