ECU 数据库 ›
MINI › MINI F54 CLUBMAN 1.5L L3 12V ONE 75kW/101HP MEVD17.2.3
查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 12 固件版本
车辆数据
| 品牌 | MINI |
| 型号 | F54 CLUBMAN |
| 发动机 | 1.5L L3 12V ONE 75kW/101HP MEVD17.2.3 |
| 原厂功率 | 102 CV / 75 kW |
| 排量 | 1500 cc |
| 燃料 | Benzina sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | MEVD17.2.3 |
| 存储 / EPROM | MICRO ST TRICORE - 32768 - 400000 |
可用的调校选项:
- Spark advance correction for soundtuning - nomal mode
- Spark advance correction for soundtuning - sport mode
- Base timing
- Minimum advance allowed protection - motore caldo
- Lambda/AFR full load/WOT
- Lambda/AFR mixture at part load
- Optimal spark timing/MBT
- Optimal spark timing/MBT - emergency
- Boost pressure limiter - advance correction
- Boost pressure limiter - advance correction 2
- Boost pressure limiter for diagnostics
- Boost pressure limiter for diagnostics 2
- Maximum torque limitation at clutch
- Correction for boost pressure
- Driver torque limit for clutch protection
- Compression ratio for turbocharger protection
- Engine torque reducing factor depending on engine speed
- Engine torque reducing factor depending on temperature
- HFM/HLM threshold for diagnosis
- High pressure fuel pump setpoint
- High pressure fuel pump setpoint - cold condition
- High pressure fuel pump setpoint - full load
- High pressure fuel pump setpoint - limp home mode
- Intake pressure protection
- Intake valve lift
- Intake valve lift - cold
- Intake valve lift - cold 3
- Intake valve lift - limit
- Intake valve lift - warm
- Intake valve lift - warm 2
- Torque limiter 2
- Advance limiter - emergency
- Basic value Lambda sensor
- Lambda target value
- Torque limiter
- Torque limiter - AT
- Torque limiter in full load
- Lambda enrichment - open loop
- Lambda minimum value for components protection
- Lambda fat-running limit for component protection
- RPM Limiter
- RPM limit for ECT sensor
- RPM limit for EOT sensor
- Knock detection factor
- Maximum absolute effective torque
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Maximum boost pressure load
- Throttle air mass flow calculation
- Maximum rail pressure at start-up
- Optimal engine moment
- Pressure ratio depending on IAT
- Maximum pressure ratio limit depending on temperature
- Maximum pressure ratio limit depending on ECT
- Specific pressure injection after starting
- Turbo pressure variation control factor
- Driver torque request
- Driver torque request for low speed
- Maximum threshold for detecting engine knock
- Start of injection
- Maximum upper tolerance intake pressure protection
- Lower pressure control threshold
- Theoretical maximum engine power
- Turbo pressure sensor - lower threshold
- Upper engine rpm threshold for diagnostic control
- Upper pressure control threshold
- Wastegate duty-cycle
固件标识 (12)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
| 0000208A023B04 | 00003609452801 |
1.94.005 | 000036BC452C06 |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 000036096D1401 |
1.98.011 | 000033816D1402 |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 00003609951401 |
1.98.007 | 00005525951405 |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 00003609951401 |
1.98.010 | 00005527951405 |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 000036096D1E01 |
1.98.011 | 000055276D1E07 |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 000036096D1401 |
1.98.005 | 000055256D1402 |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 00003609951401 |
1.98.006 | 000036BC95140B |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 000036096D1E01 |
1.98.010 | 000036C06D1E07 |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 00003609951401 |
1.98.005 | 000036BC951405 |
BOSCH MEVD17.2.3 |
| 0000208A023B05 | 000036096D1401 |
1.98.005 | 000055276D1402 |
BOSCH MEVD17.2.3 |
| 0000208A024505 | 000036099F0A01 |
1.98.005 | 000036BC9F0A01 |
BOSCH MEVD17.2.3 |
| 0000208A024505 | 00003609952801 |
1.00.006 | 00005527952801 |
BOSCH MEVD17.2.3 |
ECU 说明
MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata