MERCEDES S CLASS W222 S320 3.0L V6 TURBO 200kW/268HP MED17.7.3.1

ECU BOSCH MED17.7.3.1 · 272 CV (2 kW) · 3000 cc · Benzina sovralimentato

ECU 数据库MERCEDES › MERCEDES S CLASS W222 S320 3.0L V6 TURBO 200kW/268HP MED17.7.3.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 5 固件版本

车辆数据

品牌MERCEDES
型号S CLASS W222
发动机S320 3.0L V6 TURBO 200kW/268HP MED17.7.3.1
原厂功率272 CV / 2 kW
排量3000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.7.3.1
存储 / EPROMMicro TC1797+ Flash esterna S29CD016G

可用的调校选项:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Height correction for boost pressure
  • Desired engine load calculation
  • Compression ratio for turbocharger protection
  • Desired pressure ratio
  • Exhaust gas temperature
  • Maximum value for EKP (electric fuel pump)
  • Factor to correct fuel delivery system
  • Factor for reducing maximum filling
  • Maximum value for HDP (high pressure fuel pump)
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Torque limiter for diagnostic
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Torque limiter at high EGT
  • Max desired pressure ratio limit
  • Max desired pressure ratio limit (Sport mode)
  • RPM Limiter
  • RPM limiter 3
  • RPM limit for EOT sensor
  • Boost pressure linearization
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Maximum indicated torque
  • Maximum boost pressure load
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max injection amount for each cylinder
  • Maximum negative deviation for boost overcharge
  • Max torque profile
  • Optimal engine moment
  • Torque/load reduction for overheating protection
  • Power limit torque table
  • Pressure ratio depending on IAT
  • Maximum pressure ratio limit depending on temperature
  • Specific air mass flow quantity limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management
  • Turbocharger volumetric efficiency

固件标识 (5)

硬件号软件号 (chip)版本升级软件ECU
00090410002769027500 1.94.0122769032402 BOSCH MED17.7.3.1
00090410002769025700 1.94.0162769038101 BOSCH MED17.7.3.1
00090410002769025000 1.94.0092769031701 BOSCH MED17.7.3.1
00090410002769029900 1.94.0092769030803 BOSCH MED17.7.3.1
00090410002769027500 1.94.0052769037902 BOSCH MED17.7.3.1

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop