MERCEDES CLS CLASS C218 CLS400 3.0L V6 24V TURBO 245kW/329HP MED17.7.3.1

ECU BOSCH MED17.7.3.1 · 333 CV (245 kW) · 3000 cc · Benzina sovralimentato

ECU 数据库MERCEDES › MERCEDES CLS CLASS C218 CLS400 3.0L V6 24V TURBO 245kW/329HP MED17.7.3.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 3 固件版本

车辆数据

品牌MERCEDES
型号CLS CLASS C218
发动机CLS400 3.0L V6 24V TURBO 245kW/329HP MED17.7.3.1
原厂功率333 CV / 245 kW
排量3000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.7.3.1
存储 / EPROMMicro TC1797+ Flash esterna S29CD016G

可用的调校选项:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Height correction for boost pressure
  • Desired engine load calculation
  • Compression ratio for turbocharger protection
  • Compression ratio limiting for compressor depending on IAT sensor
  • Exhaust gas temperature
  • Maximum value for EKP (electric fuel pump)
  • Factor to correct fuel delivery system
  • Factor for reducing maximum filling
  • Maximum value for HDP (high pressure fuel pump)
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint 2
  • Torque limiter for diagnostic
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Torque limiter at high EGT
  • RPM Limiter
  • RPM limiter 3
  • RPM limit for EOT sensor
  • Boost pressure linearization
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Maximum indicated torque
  • Maximum compression ratio
  • Maximum engine pressure ratio
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max injection amount for each cylinder
  • Maximum negative deviation for boost overcharge
  • Max torque profile
  • Optimal engine moment
  • Torque/load reduction for overheating protection
  • Pressure ratio depending on IAT
  • Specific air mass flow quantity limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management
  • Turbocharger volumetric efficiency

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
00090410002769026200 1.94.0022769031503 BOSCH MED17.7.3.1
00090410002769027000 1.94.0092769030702 BOSCH MED17.7.3.1
00090410002769027700 1.94.0092769035802 BOSCH MED17.7.3.1

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop