MERCEDES TRUCK ACTROS 1844 12L V6 320kW/429HP TEMIC

ECU TEMIC TEMIC PLD · 435 CV (32 kW) · 12000 cc · Diesel sovralimentato

ECU 数据库MERCEDES TRUCK › MERCEDES TRUCK ACTROS 1844 12L V6 320kW/429HP TEMIC

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 13 固件版本

车辆数据

品牌MERCEDES TRUCK
型号ACTROS
发动机1844 12L V6 320kW/429HP TEMIC
原厂功率435 CV / 32 kW
排量12000 cc
燃料Diesel sovralimentato
车辆类型Tir

ECU

制造商TEMIC
型号TEMIC PLD
存储 / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

可用的调校选项:

  • Max threshold air mass flow throught compressor
  • Boost pressure limiter
  • Protection for engine overheating
  • Protection for engine overheating 2
  • Protection for engine overheating 3
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection angle
  • Injection angle 2
  • Injection angle - correction
  • Injection delivery angle
  • Smoke limiter
  • Maximum indicated torque
  • Max torque profile

固件标识 (13)

硬件号软件号 (chip)版本升级软件ECU
07B 1.54.005 TEMIC TEMIC PLD
23E 1.54.021 TEMIC TEMIC PLD
22B 1.54.008 TEMIC TEMIC PLD
07B 1.54.012 TEMIC TEMIC PLD
24B 1.54.007 TEMIC TEMIC PLD
24B 1.54.011 TEMIC TEMIC PLD
09D 1.54.013 TEMIC TEMIC PLD
08E 1.54.020 TEMIC TEMIC PLD
11C 1.54.016 TEMIC TEMIC PLD
06A 1.54.017 TEMIC TEMIC PLD
10B 1.54.015 TEMIC TEMIC PLD
56E 1.54.119 TEMIC TEMIC PLD
60A 1.54.014 TEMIC TEMIC PLD

ECU 说明

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.
This Setting File can be used for serial system NewGenius.