McLAREN SENNA 4.0L V8 32V BITURBO 588kW/786HP ME17.8.33 — ECU BOSCH ME17.8.33

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 1 固件版本

获取该车辆的文件

可用的调校选项:

Maximum air charge for overboost protection with turbocharger fault
Base timing
Optimal spark timing/MBT
Knock correction advance max
Boost pressure
Height correction for boost pressure
Desired engine load calculation
Lambda correction for engine temperature after starting
Load / throttle position reference
Desired boost pressure
Desired pressure ratio
Exhaust gas temperature
Characteristic line correction factor for pressure ratio for turbocharger overspeed protection
Factor to correct fuel delivery system
Maximum injection quantity
Torque limiter 2
Advance limiter for component protection 1
Lambda enrichment for components protection
Lambda correction for exhaust manifold temperature
RPM Limiter
RPM limiter 3
RPM limiter 4
RPM Limiter 5
RPM Gear Shift
RPM limiter - throttle cut
RPM limit for ECT sensor
RPM limit for EOT sensor
Knock detection factor
Speed limiter
Maximum indicated torque
Throttle air mass flow calculation
Manifold absolute pressure time delay
Characteristic manifold absolute pressure time constant of the LRS
Max torque profile
Optimal engine moment
Power limit torque table
Relative permissible torque from the pedal position in torque limitation
Pressure ratio depending on IAT
% relative air filling limit depending on IAT
Driver torque request
Torque limiter for selected gear
Throttle angle management

硬件号	软件号 (chip)	版本	升级软件	ECU
—	—	1.94.007	10SW058767	BOSCH ME17.8.33

MICRO Infineon Tricore TC1797 To work on this ECU you can use NewTrasdata

The Genius OBD + Bench € 2.500 购买