LOTUS ELISE S3 CR 1.6L 16V 104kW/140HP EFI T6E

ECU EFI T6E · 142 CV (104 kW) · 1600 cc · Benzina aspirato

ECU 数据库LOTUS › LOTUS ELISE S3 CR 1.6L 16V 104kW/140HP EFI T6E

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 6 固件版本

车辆数据

品牌LOTUS
型号ELISE S3
发动机CR 1.6L 16V 104kW/140HP EFI T6E
原厂功率142 CV / 104 kW
排量1600 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商EFI
型号T6E
存储 / EPROMMICRO BGA MOTOROLA FRESCALE con FLASH interna 8192 Kbit - 0x100000

可用的调校选项:

  • Base timing
  • Camshaft maximum lift
  • Lambda correction
  • Lambda Correction 2
  • Main injection
  • Fan activation threshold stage 1
  • Fan activation threshold stage 2
  • Fan activation threshold with engine off
  • VANOS inlet CAM
  • Volumetric efficiency
  • VANOS exhaust CAM

固件标识 (6)

硬件号软件号 (chip)版本升级软件ECU
B132E0008FH120E0104 1.00.015 EFI T6E
B132E0008FB120E0196 1.00.011 EFI T6E
B132E0008FA120E0196 1.00.003 EFI T6E
B132E0008FE120E0104 1.00.017 EFI T6E
B132E0008FF120E0104 1.00.029 EFI T6E
B132E0008FJ120E0104 1.00.012 EFI T6E

ECU 说明

Microprocessor FMPC 5534 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata Warning! to properly exclude the lambda probe 2, after running the patch LAM2, you must disconnect the connector of lambda probe 2 after the cat.
Microprocessor FMPC 5534 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop