LEXUS RX (AL20) 200T VVT-i 2.0L TURBO 175kW/235HP DENSO

ECU DENSO 275036-0360 · 238 CV (175 kW) · 2000 cc · Benzina sovralimentato

ECU 数据库LEXUS › LEXUS RX (AL20) 200T VVT-i 2.0L TURBO 175kW/235HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 15 固件版本

车辆数据

品牌LEXUS
型号RX (AL20)
发动机200T VVT-i 2.0L TURBO 175kW/235HP DENSO
原厂功率238 CV / 175 kW
排量2000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商DENSO
型号275036-0360
存储 / EPROMMICRO NEC 76F0038GD - 6144 Kbit - C0000

可用的调校选项:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Electronic throttle control
  • Electronic throttle control 2
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Lambda driver wish 2
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet

固件标识 (15)

硬件号软件号 (chip)版本升级软件ECU
89663-48B60- 1.67.031348B6000 DENSO 275036-0360
89663-48R81- 1.67.010348R8100 DENSO D76F0196F1
89663-48R80- 1.67.006348R8000 DENSO D76F0196F1
89663-48S04- 1.67.006348S0400 DENSO D76F0196F1
89663-48R93- 1.67.004348R9300 DENSO D76F0196F1
89663-48R85- 1.67.004348R8500 DENSO D76F0196F1
89663-48R83- 1.67.004348R8300 DENSO D76F0196F1
89663-48R90- 1.67.031348R9000 DENSO D76F0196F1
89663-48V00- 1.67.004348V0000 DENSO D76F0196F1
89663-4D092- 1.00.00734D09200 DENSO D76F0219F1
89663-48R52- 1.00.008348R5200 DENSO D76F0219F1
89663-24372- 1.00.00432437200 DENSO D76F0219F1
89663-53N91- 1.00.008353N9100 DENSO D76F0219F1
89663-24381- 1.00.00932438100 DENSO D76F0219F1
89663-53N92- 1.00.005353N9200 DENSO D76F0219F1

ECU 说明

Microprocessor D76F0196F1 This Setting File can be used for serial system NewGenius.
Microprocessor NEC 76F0038GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata