LEXUS RC(XC10) 350 3.5L V6 228kW/306HP DENSO

ECU DENSO 275922-3410 · 310 CV (228 kW) · 3500 cc · Benzina aspirato

ECU 数据库LEXUS › LEXUS RC(XC10) 350 3.5L V6 228kW/306HP DENSO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 10 固件版本

车辆数据

品牌LEXUS
型号RC(XC10)
发动机350 3.5L V6 228kW/306HP DENSO
原厂功率310 CV / 228 kW
排量3500 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商DENSO
型号275922-3410
存储 / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

可用的调校选项:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Gearbox maximum torque allowed
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

固件标识 (10)

硬件号软件号 (chip)版本升级软件ECU
89663-24330- 1.67.00932433000 DENSO 275922-3410
89663-24270- 1.67.00532427000 DENSO 275922-3410
89663-24241 1.67.00732424100 DENSO 275922-3410
89663-24341- 1.67.00532434100 DENSO 275922-3410
89663-24230- 1.67.00932423000 DENSO 275922-3410
89663-24340- 1.67.00632434000 DENSO 275922-3410
89663-24220- 1.67.00532422000 DENSO 275922-3410
89663-24240-A 1.67.01332424000 DENSO 275922-3410
89663-24331- 1.67.00532433100 DENSO 275922-3410
89663-24231- 1.67.00532423100 DENSO 275922-3410

ECU 说明

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata