LAMBORGHINI HURACAN 5.2L V10 LP 640-4 471kW/632HP MED17.1.1

ECU BOSCH MED17.1.1 · 640 CV (471 kW) · 5200 cc · Benzina aspirato

ECU 数据库LAMBORGHINI › LAMBORGHINI HURACAN 5.2L V10 LP 640-4 471kW/632HP MED17.1.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 10 固件版本

车辆数据

品牌LAMBORGHINI
型号HURACAN
发动机5.2L V10 LP 640-4 471kW/632HP MED17.1.1
原厂功率640 CV / 471 kW
排量5200 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.1.1
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint 2
  • High fuel pressure pump limit for ECT sensor
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • Knock detection factor
  • Speed limiter
  • Maximum indicated torque
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Driver torque request Sport mode
  • Torque limiter for selected gear
  • Throttle angle management

固件标识 (10)

硬件号软件号 (chip)版本升级软件ECU
1.94.0104T0907552AB 0001 BOSCH MED17.1.1
1.94.0104T0907552G 0005 BOSCH MED17.1.1
1.94.0074T0907552P 0002 BOSCH MED17.1.1
1.94.0114T0907552F 0004 BOSCH MED17.1.1
1.94.0074T0907552AB 0002 BOSCH MED17.1.1
1.94.0054T0907552BD 0003 BOSCH MED17.1.1
1.94.0114T0907552G 0006 BOSCH MED17.1.1
1.94.0094T0907552M 0005 BOSCH MED17.1.1
1.94.0194T0907552F 0002 BOSCH MED17.1.1
1.94.0134T0907552G 0002 BOSCH MED17.1.1

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop