KAWASAKI Z 1000 17->19 105kW

ECU DENSO 21175-1212/1213/1217/1218 · 143 CV (105 kW) · 1000 cc · Benzina aspirato

ECU 数据库KAWASAKI › KAWASAKI Z 1000 17->19 105kW

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 4 固件版本

车辆数据

品牌KAWASAKI
型号Z 1000
发动机17->19 105kW
原厂功率143 CV / 105 kW
排量1000 cc
燃料Benzina aspirato
车辆类型Moto

ECU

制造商DENSO
型号21175-1212/1213/1217/1218
存储 / EPROMMicro RENESAS - 8192 Kbit -100000

可用的调校选项:

  • Base timing - full power
  • Base timing - low power
  • Base timing - clutch/neutral
  • Load / throttle position reference
  • Exhaust valve management in deceleration - gear based - full power
  • Exhaust valve management in deceleration - gear based - low power
  • Exhaust valve management - gear based - full power
  • Exhaust valve management - gear based - low power
  • Engine idle vs. ECT sensor
  • Injection for IAP - full power
  • Injection for IAP - low power
  • Injection for TPS - full power
  • Injection for TPS - low power
  • RPM Limiter
  • RPM Limiter 2
  • Ram Air
  • Secondary throttle plates management in deceleration - gear based - full power
  • Secondary throttle plates management in deceleration - gear based - low power
  • Secondary throttle plates management - gear based - full power
  • Secondary throttle plates management - gear based - low power
  • Cooling fan activation
  • Traction control - activation sensitivity
  • Traction control - slip sensitivity
  • Traction control - TPS correction

固件标识 (4)

硬件号软件号 (chip)版本升级软件ECU
21175-1213KPHJK8E0 1.00.02149245-1108 DENSO 21175-1212/1213/1217/1218
21175-1217KPHJK8D0 1.00.01049245-1112 DENSO 21175-1212/1213/1217/1218
21175-1247KPHKKPE0 1.00.01849245-1153 DENSO 21175-1240/1241/1247
21175-1252KPHNKPJ0 1.00.02449245-1158 DENSO 21175-1250/1252

ECU 说明

Microprocessor SH7058 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata