JAGUAR F-PACE (X761) 2.0L 16V D 120kW/161HP MEDC17.9

ECU BOSCH MEDC17.9 · 163 CV (12 kW) · 2000 cc · Diesel sovralimentato

ECU 数据库JAGUAR › JAGUAR F-PACE (X761) 2.0L 16V D 120kW/161HP MEDC17.9

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 2 固件版本

车辆数据

品牌JAGUAR
型号F-PACE (X761)
发动机2.0L 16V D 120kW/161HP MEDC17.9
原厂功率163 CV / 12 kW
排量2000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MEDC17.9
存储 / EPROMMICRO ST TRICORE - 32768 - 400000

可用的调校选项:

  • Boost pressure limiter
  • Boost pressure
  • Maximum torque at gear selection
  • Maximum torque limitation at clutch
  • Max accepted exhaust gas temperature value after turbine
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Max accepted exhaust gas temperature value at particulate sensor
  • Protection for engine overheating
  • Engine reference power at crankshaft
  • Basic torque management at engine cranking
  • Engine idle
  • Gearbox maximum torque allowed
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • J
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter 5
  • Torque limiter
  • Lambda value of the smoke limitation
  • Maximum indicated torque
  • Maximum engine torque at crank shaft
  • Maximum valid simulated soot mass
  • Specific injection pressure limiter
  • Relative permissible torque from the pedal position in torque limitation
  • Specific injection pressure
  • Specific injection pressure 2
  • Driver torque request
  • Driver torque request for high speed
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limiter for EFT sensor
  • Variable geometry duty cycle limit

固件标识 (2)

硬件号软件号 (chip)版本升级软件ECU
HY32-12B684-FBAH7A3-14C204-FDC 1.94.010JK83-12K532-GCE BOSCH MEDC17.9
KY32-12B684-FBAKK83-12K532-GCG 1.00.012KK83-12K532-GCG BOSCH MEDC17.9

ECU 说明

MICRO Infineon Tricore TC1793 This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata