查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 2 固件版本
车辆数据
| 品牌 | GENESIS |
| 型号 | G70 |
| 发动机 | 3.3L T-GDi 276kW/370HP SIM2K-260 |
| 原厂功率 | 375 CV / 276 kW |
| 排量 | 3300 cc |
| 燃料 | Benzina sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | CONTINENTAL-SIEMENS-VDO |
| 型号 | SIM2K-260 |
| 存储 / EPROM | MICRO ST TRICORE - 32768 - 400000 |
可用的调校选项:
- Base timing
- Base timing 2
- Optimal spark timing/MBT
- Desired engine load calculation
- Lambda correction
- Load / throttle position reference
- Exhaust gas temperature
- Factor to correct fuel delivery system
- Engine idle
- High pressure fuel pump setpoint
- High pressure fuel pump setpoint 2
- High pressure fuel pump setpoint 3
- Intake pressure protection
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Lambda enrichment for components protection
- RPM Limiter
- Lambda reference
- Knock detection factor
- MAF sensor calibration
- Optimal engine moment
- Maximum pressure ratio limit depending on temperature
- Pop/blow off valve offset - close model
- Pop/blow off valve offset - open model
- Driver torque request
- Setpoint maximum turbocharger speed
- Throttle angle management
- Torque limit table for EOT sensor
- Torque limit table for ECT sensor
- Wastegate duty-cycle
固件标识 (2)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| A2C1980170001 | E6W248E1 |
1.96.009 | IKKN3TMW_F0C |
CONTINENTAL-SIEMENS-VDO SIM2K-260 |
| A2C1980170101 | E6W248E1 |
1.00.002 | IKHK3TMS_H0A |
CONTINENTAL-SIEMENS-VDO SIM2K-260 |
车辆技术说明
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU 说明
EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 563/4 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
可用附加模块
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
