FORD MUSTANG Mk6 Facelift 5.2L V8 32V GT500 567kW/760HP MG1CS019

ECU BOSCH MG1CS019 · 771 CV (567 kW) · 5200 cc · Benzina sovralimentato

ECU 数据库FORD › FORD MUSTANG Mk6 Facelift 5.2L V8 32V GT500 567kW/760HP MG1CS019

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 3 固件版本

车辆数据

品牌FORD
型号MUSTANG Mk6 Facelift
发动机5.2L V8 32V GT500 567kW/760HP MG1CS019
原厂功率771 CV / 567 kW
排量5200 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MG1CS019
存储 / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

可用的调校选项:

  • Base timing
  • Desired engine load calculation
  • Part pedal combustion load limit
  • Exhaust gas temperature
  • Engine indicated torque
  • Engine indicated torque at stoichiometric
  • Factor to correct fuel delivery system
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • Load limit at high effectiveness of LSPI mitigation
  • Load limit at low effectiveness of LSPI mitigation
  • Load limit at nominal effectiveness of LSPI mitigation
  • Maximum throttle angle opening for a given RPM
  • Overall LSPI load limit
  • Percent accelerator pedal angle to desired throttle angle
  • Final drive rear axle ratio
  • Driver torque request for the transmission - 1st gear
  • Driver torque request for the transmission - 2th gear
  • Driver torque request for the transmission - 3th gear
  • Driver torque request for the transmission - 4th gear
  • Driver torque request for the transmission - 5th gear
  • Driver torque request for the transmission - 6th gear
  • Maximum rear axle ratio
  • Minimum rear axle ratio
  • Driver torque request
  • Driver torque request for reverse gear
  • Driven tire circumference
  • Maximum tire circumference
  • Minimum tire circumference

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
KR3A-12B684-AALR3A-12A650-KA 1.94.011LR3A-14C204-LT BOSCH MG1CS019
KR3A-12B684-AALR3A-12A650-KA 1.94.002MR3A-14C204-BGB BOSCH MG1CS019
KR3A-12B684-AALR3A-12A650-KA 1.94.010LR3A-14C204-LM BOSCH MG1CS019

ECU 说明

Micro Infineon Tricore TC298TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata