ECU 数据库 ›
FIAT › FIAT DUCATO year 2011 2.3L 16V MJET II 82kW/110HP MJD8F3
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 6 固件版本
车辆数据
| 品牌 | FIAT |
| 型号 | DUCATO year 2011 |
| 发动机 | 2.3L 16V MJET II 82kW/110HP MJD8F3 |
| 原厂功率 | 111 CV / 82 kW |
| 排量 | 2300 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | LCV |
ECU
| 制造商 | MARELLI |
| 型号 | MJD8F3 |
| 存储 / EPROM | MICRO BGA MOTOROLA FRESCALE con Flash interna MPC5565 16384 Kbit - 0x200000 |
可用的调校选项:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Engine efficiency
- EGR valve control
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Max injection limit
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Lambda value of the smoke limitation
- Max torque profile
- Max torque profile - AT
- Max torque profile - MT
- Specific injection pressure limiter for EFT sensor
- Rail pressure threshold for torque limitation
- Specific injection pressure
- Air mass flow
- RPM step reference
- Driver torque request
- Driver torque request Sport mode
- Torque limiter for EFT sensor
- Torque limit table for ECT sensor
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle - steady state
- Variable geometry duty cycle - transient state
固件标识 (6)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| MJ8F3HW00D | 1942B841 |
1.01.004 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 2841BL65 |
1.01.002 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 3042BT04 |
1.01.006 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 3042BS04 |
1.01.010 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 3045BT08 |
1.01.003 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 3042BV04 |
1.01.004 | — |
MARELLI MJD8F3 |
车辆技术说明
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU 说明
Microprocessor FMPC 5565 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
可用附加模块
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
