FIAT DOBLO Mk2 1.4L 16V 88kW/118HP Natural Power ME7.9.10

ECU BOSCH ME7.9.10 · 120 CV (88 kW) · 1400 cc · Metano sovralimentato

ECU 数据库FIAT › FIAT DOBLO Mk2 1.4L 16V 88kW/118HP Natural Power ME7.9.10

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 3 固件版本

车辆数据

品牌FIAT
型号DOBLO Mk2
发动机1.4L 16V 88kW/118HP Natural Power ME7.9.10
原厂功率120 CV / 88 kW
排量1400 cc
燃料Metano sovralimentato
车辆类型LCV

ECU

制造商BOSCH
型号ME7.9.10
存储 / EPROMMICRO ST - 6656 Kbit

可用的调校选项:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Spark advance correction for ECT sensor
  • Boost pressure limiter
  • Boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Compression ratio for turbocharger protection
  • Desired pressure ratio
  • Exhaust gas temperature
  • Injection at part load
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum indicated torque
  • Throttle air mass flow calculation
  • Max torque profile
  • Max torque profile (overboost active)
  • Optimal engine moment
  • Boost pressure threshold cycles for the overboost recognition
  • Offset tolerance depending on permissible torque
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request for low speed
  • Driver torque request for low speed in Sport mode
  • Driver torque request for reverse gear
  • Driver torque request Sport mode
  • Throttle angle management
  • Turbocharger volumetric efficiency
  • Wastegate duty-cycle

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
0261S057941037526588 1.91.028 BOSCH ME7.9.10
0261S057941037512138 1.91.015 BOSCH ME7.9.10
0261S077861037521138 1.91.002 BOSCH ME7.9.10

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Microprocessor ST10F275 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata