ECU 数据库 ›
FIAT › FIAT BRAVO Mk2 1.4L 16V TB MULTIAIR 103kW/138HP IAW8GMF
查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 2 固件版本
车辆数据
| 品牌 | FIAT |
| 型号 | BRAVO Mk2 |
| 发动机 | 1.4L 16V TB MULTIAIR 103kW/138HP IAW8GMF |
| 原厂功率 | 140 CV / 103 kW |
| 排量 | 1400 cc |
| 燃料 | Benzina sovralimentato |
| 车辆类型 | Auto |
ECU
可用的调校选项:
- Optimal spark timing/MBT
- Advance at part load
- Advance correction
- Base lambda - cold
- Base Lambda - hot
- Boost pressure limiter
- Electronic throttle control
- Compressor pressure ratio limit for pumping and speed
- Average power effective limitation
- Average torque effective limitation
- Advance limiter
- Basic value setpoint Lambda sensor
- RPM Limiter
- Maximum Upstream pressure in event of Normal boost modality
- Maximum Upstream pressure in event of normal boost modality, Sport mode activated
- Maximum Upstream pressure in event of overboost modality
- Maximum Upstream pressure in event of overboost modality, Sport modality activated
- Max torque profile
- Torque management in Normal mode
- Torque management Sport mode
- Power Control in Normal mode
- Power Control in Sport mode
- Power limit torque table
- Resistant torque table
- Torque limit table for ECT sensor
- Take-off torque law in Normal mode
- Take-off torque law in Normal mode with power control
- Take-off torque law in Sport mode
- Take-off torque law in Sport mode with power control
- Wastegate duty-cycle
固件标识 (2)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
| MM8GMFHW503 | 4S21CK53 |
1.91.013 | — |
MARELLI 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW |
| MM8GMFHW503 | 4S10CK49 |
1.91.031 | — |
MARELLI 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW |
车辆技术说明
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU 说明
Microprocessor FMPC 5565 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.