FIAT 500 (312) 1.4L 16V MULTIAIR 75kW/101HP IAW8GMKC

ECU MARELLI 8GMK/8GML · 102 CV (75 kW) · 1400 cc · Benzina aspirato

ECU 数据库FIAT › FIAT 500 (312) 1.4L 16V MULTIAIR 75kW/101HP IAW8GMKC

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 1 固件版本

车辆数据

品牌FIAT
型号500 (312)
发动机1.4L 16V MULTIAIR 75kW/101HP IAW8GMKC
原厂功率102 CV / 75 kW
排量1400 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商MARELLI
型号8GMK/8GML
存储 / EPROMMicro BGA STSPC564A80 - 32748Kbit - 400000

可用的调校选项:

  • Base timing
  • Base lambda - cold
  • Base Lambda - hot
  • Boost pressure limiter
  • Electronic throttle control
  • Compressor pressure ratio limit for pumping and speed
  • Average power effective limitation
  • Average torque effective limitation
  • Torque limiter
  • Maximum Upstream pressure in event of Normal boost modality
  • Maximum Upstream pressure in event of normal boost modality, Offroad mode activated
  • Maximum Upstream pressure in event of normal boost modality, Sport mode activated
  • Maximum Upstream pressure in event of overboost modality
  • Maximum Upstream pressure in event of overboost modality, Offroad modality activated
  • Maximum Upstream pressure in event of overboost modality, Sport modality activated
  • Max torque profile
  • Torque management in Normal mode
  • Torque management Sport mode
  • Power Control in Normal mode
  • Power Control in Sport mode
  • Power limit torque table
  • Torque limit table for ECT sensor
  • Take-off torque law in Normal mode
  • Take-off torque law in Normal mode with power control
  • Take-off torque law in Sport mode
  • Take-off torque law in Sport mode with power control
  • Wastegate duty-cycle

固件标识 (1)

硬件号软件号 (chip)版本升级软件ECU
MM8GMKHW66608020000 1.91.01308020000 MARELLI 8GMK/8GML

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Microprocessor BGA SPC564A80 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual. To work on this ECU you can use NewTrasdata