ECU 数据库 ›
DACIA › DACIA DUSTER Mk1 1.5L dCi 66kW/90HP EDC17C84
查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 9 固件版本
车辆数据
| 品牌 | DACIA |
| 型号 | DUSTER Mk1 |
| 发动机 | 1.5L dCi 66kW/90HP EDC17C84 |
| 原厂功率 | 90 CV / 66 kW |
| 排量 | 1500 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC17C84 |
| 存储 / EPROM | MICRO ST TRICORE - 20480 Kbit - 280000 |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure in aftertreatment modes
- Maximum torque limitation at clutch
- Effective engine torque setpoint for safety
- Max accepted exhaust gas temperature value after turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Max accepted exhaust gas temperature value at particulate sensor
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor 2
- Max torque correction factor for IAT sensor in aftertreatment modes
- Max torque correction factor for IAT sensor in aftertreatment modes 2
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Basic torque management at engine cranking 3
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes
- Torque limiter
- Torque limiter for diagnostic
- Maximum absolute effective torque in ECO mode
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Maximum indicated torque in regeneration mode 2
- Maximum indicated torque - safety condition
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Turbine temperature maximum value
- Specific injection pressure limiter
- Specific injection pressure limiter 4
- Specific injection pressure limiter in aftertreatment modes
- Specific injection pressure limiter for diagnostics
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific injection pressure in aftertreatment modes 2
- Air mass flow in aftertreatment modes
- Driver torque request
- Driver torque request Sport mode
- Maximum temperature before turbine for diagnosis
- Temperature before turbine setpoint during npu, spu and injection mode
- Torque limiter for EFT sensor
- Torque limiter in recovery mode
- Torque model - fuel quantity to torque conversion
- Torque model - fuel quantity to torque conversion 2
- Torque model - fuel quantity to torque conversion in aftertreatment modes
- Torque model - torque to fuel quantity conversion
固件标识 (9)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
| — | 10SW003006 |
1.94.011 | 10SW020501 |
BOSCH EDC17C84 |
| — | 10SW020475 |
1.94.004 | 10SW020475 |
BOSCH EDC17C84 |
| — | 10SW003006 |
1.94.004 | 10SW006351 |
BOSCH EDC17C84 |
| — | 10SW020501 |
1.94.006 | 10SW020501 |
BOSCH EDC17C84 |
| — | 10SW003006 |
1.94.017 | 10SW016532 |
BOSCH EDC17C84 |
| — | 10SW003006 |
1.94.008 | 10SW020218 |
BOSCH EDC17C84 |
| — | 10SW003006 |
1.94.004 | 10SW020476 |
BOSCH EDC17C84 |
| — | 10SW003006 |
1.94.012 | 10SW011410 |
BOSCH EDC17C84 |
| — | 1037553087 |
1.94.009 | 10SW001061 |
BOSCH EDC17C84 |
车辆技术说明
OBD visible at the bottom of the glove compartment.
ECU 说明
Microprocessor TC1782 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata