查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 14 固件版本
车辆数据
| 品牌 | CITROEN |
| 型号 | NEMO |
| 发动机 | 1.4L 8V HDI 55kW/75HP EDC16C34 |
| 原厂功率 | 75 CV / 55 kW |
| 排量 | 1400 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | LCV |
ECU
| 制造商 | BOSCH |
| 型号 | EDC16C34 |
| 存储 / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
可用的调校选项:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure in aftertreatment modes
- Boost pressure F (temperature)
- EGR valve control
- Basic torque management at engine cranking
- Injection period
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes
- Injection period in aftertreatment modes 2
- Injection period in aftertreatment modes 3
- Injection period in aftertreatment modes 4
- Injection period in aftertreatment modes 5
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Injection in aftertreatment modes 3
- Torque limiter 2
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- Driver torque request for high speed - AT
- Driver torque request for low speed - AT
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear - AT
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit in regeneration mode
- Variable geometry duty cycle limit in regeneration mode 2
固件标识 (14)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| 0281012620 | 1037383736 |
1.67.024 | 1037383736 |
BOSCH EDC16C34 |
| 0281014444 | 1037391714 |
1.67.013 | 1037391734 |
BOSCH EDC16C34 |
| 0281014XXX | 1037391715 |
1.67.015 | 1037391715 |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9666432280 |
1.67.012 | — |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9666432480 |
1.67.008 | 9666432480 |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9665691780 |
1.67.010 | 1037386093 |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9667204680 |
1.67.009 | 1037391738 |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9666934680 |
1.67.003 | 1037391729 |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9665691680 |
1.67.011 | 1037386092 |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9665691680 |
1.67.014 | 1037386090 |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9666082580 |
1.67.001 | — |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9678878980 |
1.67.013 | 1037391748 |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9666432480 |
1.67.024 | — |
BOSCH EDC16C34 |
| EDC16_BOSCH | 9666934680 |
1.67.015 | — |
BOSCH EDC16C34 |
车辆技术说明
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU 说明
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
