查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
7 固件版本
车辆数据
| 品牌 | CITROEN |
| 型号 | JUMPY |
| 发动机 | 1.6L 16V HDI 66kW/88HP EDC16C34 |
| 原厂功率 | 90 CV / 66 kW |
| 排量 | 1600 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | LCV |
ECU
| 制造商 | BOSCH |
| 型号 | EDC16C34 |
| 存储 / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
可用的调校选项:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- Boost pressure F (temperature)
- EGR valve control
- EGR valve control 2
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection period in aftertreatment modes
- Injection period in aftertreatment modes 2
- Injection period in aftertreatment modes 3
- Injection period in aftertreatment modes 4
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Injection in aftertreatment modes 3
- L
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific injection pressure in aftertreatment modes 2
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- Driver torque request 2
- Driver torque request for high speed - AT
- Driver torque request for low speed - AT
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear - AT
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit in regeneration mode
- Variable geometry duty cycle limit in regeneration mode 2
- Variable geometry duty cycle limit in regeneration mode 3
固件标识 (7)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.67.008 | 1037393467 |
BOSCH EDC16C34 |
| — | — |
1.67.019 | 1037374179 |
BOSCH EDC16C34 |
| — | — |
1.67.017 | 1037383740 |
BOSCH EDC16C34 |
| — | — |
1.67.013 | 1037393488 |
BOSCH EDC16C34 |
| — | — |
1.67.034 | 1037393467 |
BOSCH EDC16C34 |
| — | — |
1.67.018 | 1037386162 |
BOSCH EDC16C34 |
| — | 1037386177 |
1.67.002 | 1037393467 |
BOSCH EDC16C34 |
车辆技术说明
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU 说明
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
