CITROEN C3 PICASSO 1.6L 16V HDI 84kW/113HP SID807EVO

ECU CONTINENTAL-SIEMENS-VDO SID807EVO · 114 CV (84 kW) · 1600 cc · Diesel sovralimentato

ECU 数据库CITROEN › CITROEN C3 PICASSO 1.6L 16V HDI 84kW/113HP SID807EVO

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 1 固件版本

车辆数据

品牌CITROEN
型号C3 PICASSO
发动机1.6L 16V HDI 84kW/113HP SID807EVO
原厂功率114 CV / 84 kW
排量1600 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商CONTINENTAL-SIEMENS-VDO
型号SID807EVO
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • Load / throttle position reference
  • Exhaust gas temperature value before turbine in regeneration mode
  • Exhaust gas temperature value before turbine in regular injection mode
  • Basic torque management at engine cranking
  • Injection opening time related to inj. pressure
  • J
  • Torque limiter 2
  • Torque limiter
  • Intake manifold pressure
  • Throttle air mass flow calculation
  • Throttle air mass flow calculation 2
  • Max torque profile
  • Specific injection pressure limiter
  • Specific injection pressure
  • Driver torque request for high speed
  • Driver torque request for medium speed
  • Driver torque request for low speed
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor
  • Torque model - fuel quantity to torque conversion
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

固件标识 (1)

硬件号软件号 (chip)版本升级软件ECU
96632414809666681180 1.83.0059679122080 CONTINENTAL-SIEMENS-VDO SID807EVO

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata