查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 9 固件版本
车辆数据
| 品牌 | CITROEN |
| 型号 | C3 Mk2 |
| 发动机 | 1.6L 16V HDI 68kW/91HP EDC17C10 |
| 原厂功率 | 92 CV / 68 kW |
| 排量 | 1600 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC17C10 |
| 存储 / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- EGR valve control
- Exhaust gas temperature
- Exhaust gas temperature 2
- Injection opening time related to inj. pressure
- Torque limiter 2
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter for smoke limitation
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request
- Driver torque request for high speed
- Driver torque request for low speed
- Driver torque request at the start
- Driver torque request for reverse gear
- Torque limiter for EFT sensor
- Torque limit table for ECT sensor
固件标识 (9)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| 9666077280 | 9666729580 |
1.94.014 | 9667334480 |
BOSCH EDC17C10 |
| 9666077280 | 9666729580 |
1.94.011 | 9677773280 |
BOSCH EDC17C10 |
| 9666077280 | 9666729580 |
1.94.002 | 9692419980 |
BOSCH EDC17C10 |
| 9666077280 | 9666729580 |
1.94.013 | 9691599380 |
BOSCH EDC17C10 |
| 9666077280 | 9666729480 |
1.94.074 | 9667322580 |
BOSCH EDC17C10 |
| 9666077280 | 9666729480 |
1.94.002 | 9678528580 |
BOSCH EDC17C10 |
| 9666077280 | 9666729580 |
1.94.011 | 9678314280 |
BOSCH EDC17C10 |
| 9666077280 | 9666729580 |
1.94.014 | 9678910180 |
BOSCH EDC17C10 |
| 9666077280 | 9666729580 |
1.94.008 | 9679176680 |
BOSCH EDC17C10 |
车辆技术说明
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU 说明
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
