ECU 数据库 ›
CHRYSLER › CHRYSLER SEBRING JS MK3 2.0L 16V CRD 103kW/138HP EDC16U31
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 9 固件版本
车辆数据
| 品牌 | CHRYSLER |
| 型号 | SEBRING JS MK3 |
| 发动机 | 2.0L 16V CRD 103kW/138HP EDC16U31 |
| 原厂功率 | 140 CV / 103 kW |
| 排量 | 2000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC16U31 |
| 存储 / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
可用的调校选项:
- Smoke limiter 2
- Main injection duration angle
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- Boost pressure in aftertreatment modes 3
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control in aftertreatment modes
- EGR valve control in aftertreatment modes 2
- EGR valve control in aftertreatment modes 3
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection period - correction
- Maximum injection period
- Max injection limit - limp mode
- Injection 1
- Injection in aftertreatment modes 1
- Torque limiter 2
- Torque limiter
- Smoke limiter
- RPM limiter - fuel cut
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation in aftertreatment modes
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for fuel overheating
- Protection for oil overheating
- Air mass flow
- Driver torque request
- Driver torque request 2
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
固件标识 (9)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | 1037390630 |
1.67.017 | 1037395433 |
BOSCH EDC16U31 |
| — | 1037389266 |
1.67.009 | 1037389266 |
BOSCH EDC16U31 |
| — | 1037383857 |
1.67.010 | 1037383857 |
BOSCH EDC16U31 |
| — | 1037394141 |
1.67.010 | 1037396083 |
BOSCH EDC16U31 |
| — | 1037391836 |
1.67.022 | 1037391836 |
BOSCH EDC16U31 |
| — | 1037387096 |
1.67.005 | 1037391836 |
BOSCH EDC16U31 |
| — | 1037383857 |
1.67.015 | 1037391837 |
BOSCH EDC16U31 |
| — | 1037389266 |
1.67.013 | 1037391836 |
BOSCH EDC16U31 |
| — | 1037389265 |
1.67.020 | 1037389265 |
BOSCH EDC16U31 |
车辆技术说明
OBD located under the steering column, to the right of the pedalboard, accessible without removing anything.
ECU 说明
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File is enabled for serial programming system : Genius or New Genius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
