查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 6 固件版本
车辆数据
| 品牌 | CASE IH |
| 型号 | PUMA |
| 发动机 | 125 6.7L 93kW/126HP EDC16C39 |
| 原厂功率 | 126 CV / 93 kW |
| 排量 | 6700 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Tractor |
ECU
| 制造商 | BOSCH |
| 型号 | EDC16C39 |
| 存储 / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
可用的调校选项:
- Boost pressure limiter
- Boost pressure
- Boost pressure in aftertreatment modes
- Correction for boost pressure
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Exhaust gas temperature 2
- Protection for engine overheating
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Gearbox maximum torque allowed 2
- Injection period
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- L
- Torque limiter 3
- Torque limiter 4
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- MAP - limp home mode
- Maximum indicated torque
- Protection for air load overheating
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Specific injection pressure limiter for diagnostics
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Air mass flow
- Driver torque request
- CAT downstream temperature sensor characterization
- CAT upstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Volumetric efficiency
- Voluimetric efficiency
- Volumetric efficiency - correction
- Volumetric efficiency - EGR correction
- Turbocharger volumetric efficiency
固件标识 (6)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.67.015 | P400V41 itobdns5.cp7 |
BOSCH EDC16C39 |
| — | — |
1.67.015 | P400V41 itobdnsb.cp7 |
BOSCH EDC16C39 |
| — | — |
1.67.007 | P400V41 itobdnsa.cph |
BOSCH EDC16C39 |
| — | — |
1.67.010 | P400V41 itobdnsa.cph |
BOSCH EDC16C39 |
| — | — |
1.67.007 | P400V41 itobdns5.cp7 |
BOSCH EDC16C39 |
| — | — |
1.67.009 | P400V41 itobdnsb.cph |
BOSCH EDC16C39 |
ECU 说明
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
