BMW Z4 SERIES G29 M40i 3.0L 24V 250kW/335HP DME_86T0

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

车辆数据

ECU

可用的调校选项:

• Base timing
• Base timing 2
• Camshaft maximum lift
• Lambda/AFR full load/WOT
• Lambda/AFR mixture at part load
• Optimal spark timing/MBT
• Optimal spark timing/MBT 2
• Knock correction advance max
• Boost pressure limiter for diagnostics
• Max accepted exhaust gas temperature value after turbine
• Max accepted exhaust gas pressure at exhaust manifold
• Engine torque reducing factor depending on temperature
• HFM/HLM air flow high limit
• HFM/HLM air flow low limit
• High pressure fuel pump setpoint
• High fuel pressure pump limit
• High fuel pressure pump limit 2
• Intake pressure protection
• Intake valve lift - cold
• Intake valve lift - catalyst heating
• Intake valve lift - start for ECT sensor
• Intake valve lift - warm
• Basic value Lambda sensor
• Torque limiter
• Lambda minimum value for components protection
• Lambda fat-running limit for component protection
• Knock detection factor
• Speed limiter
• Maximum compression ratio
• Maximum possible engine charge
• Maximum engine power
• Maximum engine pressure ratio
• Maximum relative engine air charge
• Max torque profile - AT
• Max torque profile - MT
• Optimal engine moment
• Pressure ratio depending on IAT
• Pressure ratio depending on IAT 2
• Requested engine filling
• Driver torque request
• Driver torque request Eco mode - AT
• Driver torque request Eco mode - AT - 2
• Driver torque request Normal mode - AT
• Driver torque request Sport mode - AT
• Driver torque request Sport mode - AT - 2
• Driver torque request Eco mode
• Driver torque request Eco mode - MT
• Driver torque request Eco mode - MT - 2
• Driver torque request Normal mode - MT
• Driver torque request Sport mode - MT
• Driver torque request Sport mode - MT - 2
• Driver torque request Sport mode
• Torque limiter for selected gear
• Torque limiter for selected gear - AT
• Maximum upper tolerance intake pressure protection
• Torque limit table for IAT sensor
• Torque limiter to prevent preignition
• Turbocharger volumetric efficiency
• Wastegate duty-cycle

固件标识 (20)

ECU 说明

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy Rapid PRO - Modulo Aggiuntivo Dimsport +15 % € 349 Buy Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

获取该车辆的文件

读写此 ECU 的工具

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 购买 The Genius OBD + Bench € 2.500 购买

其他 BMW

→ 所有 ECU BMW