ECU 数据库 ›
BMW › BMW X7 SERIES G07 M50d 3.0L L6 24V 294kW/395HP DME__DDE832C
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 4 固件版本
车辆数据
| 品牌 | BMW |
| 型号 | X7 SERIES G07 |
| 发动机 | M50d 3.0L L6 24V 294kW/395HP DME__DDE832C |
| 原厂功率 | 400 CV / 294 kW |
| 排量 | 3000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure limiter 3
- Boost pressure limiter 4
- Boost pressure limiter 5
- Boost pressure
- Boost pressure 10
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Boost pressure 5
- Boost pressure 6
- Boost pressure 7
- Boost pressure 8
- Boost pressure 9
- Max accepted exhaust gas temperature value after turbine
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Protection for engine overheating 4
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Maximum injection period
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- Injection 2
- J
- Injection 4
- Injection 5
- Torque limiter 2
- L
- Torque limiter 8
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Torque limiter during particulate filter overloading - temperature
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 3
- Maximum engine torque at crank shaft
- Maximum engine power
- Protection for fuel overheating
- Protection for fuel overheating 2
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- Driver torque request
- Driver torque request AWD
- CAT upstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- EGT sensor thresholds on CAT for diagnosis
- EGT sensor thresholds on DPF for diagnosis
- Torque limiter in recovery mode
- Transmission torque limitation at gs-messages interruption
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
- Variable geometry duty cycle limit 5
- Variable geometry duty cycle limit 6
- Indicated wheel torque
固件标识 (4)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| 000029B6180B00 | 000029B8180B00 |
1.94.009 | 000066DD180B01 |
BOSCH MD1CP002 (DME__DDE832C) |
| 000029B6181600 | 000029B8181600 |
1.94.011 | 00005D64181605 |
BOSCH MD1CP002 (DME__DDE832C) |
| 000029B6181700 | 000029B8181700 |
1.94.005 | 000066DD181705 |
BOSCH MD1CP002 (DME__DDE832C) |
| 000029B6181D00 | 000029B8181D00 |
1.94.009 | 000066DD181D02 |
BOSCH MD1CP002 (DME__DDE832C) |
ECU 说明
Microprocessor BGA FREESCALE SPC57xxx This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
