BMW M8 SERIES G15 4.4L V8 32V 441kW/591HP DME_88T0

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

车辆数据

ECU

可用的调校选项:

• Base timing
• Base timing 2
• Camshaft maximum lift
• Lambda/AFR full load/WOT
• Optimal spark timing/MBT
• Optimal spark timing/MBT 2
• Knock correction advance max
• Boost pressure limiter for diagnostics
• Maximum torque limitation at clutch
• Coolant target temperature
• Desired pressure ratio
• Max accepted exhaust gas temperature value after turbine
• Max accepted exhaust gas pressure at exhaust manifold
• Exhaust gas temperature
• Exhaust gas temperature 2
• Exhaust gas temperature 3
• Exhaust gas temperature 4
• Exhaust gas temperature 5
• Max torque correction factor for knock sensor
• Filling factor limit
• Filling factor limit 3
• Filling factor limit 4
• Fuel pump speed
• Fuel pump speed 3
• Engine torque reducing factor depending on engine speed
• Engine torque reducing factor depending on temperature
• RPM limiter in limp mode
• HFM/HLM threshold for diagnosis
• HFM/HLM air flow high limit
• HFM/HLM air flow low limit
• High pressure fuel pump setpoint
• High fuel pressure pump limit
• High fuel pressure pump limit for ECT sensor
• Intake pressure protection
• Intake valve lift - cold
• Intake valve lift - catalyst heating
• Intake valve lift - start for ECT sensor
• Intake valve lift - warm
• Torque limiter 2
• Torque limiter 3
• L
• Torque limiter 5
• Torque limiter 6
• Basic value Lambda sensor
• Torque limiter
• Torque limiter for diagnostic
• Lambda enrichment for components protection
• Lambda minimum value for components protection
• Lambda fat-running limit for component protection
• RPM Limiter
• RPM limiter - AT
• RPM limiter - MT
• Low pressure fuel pump for EFT sensor
• Knock detection factor
• Speed limiter
• Maximum indicated torque
• Maximum compression ratio
• Maximum possible engine charge
• Maximum engine pressure ratio
• Minimum intake manifold pressure
• Maximum relative engine air charge
• Maximum rail pressure at start-up
• Max torque profile - AT
• Max torque profile - MT
• Optimal engine moment
• Pressure ratio depending on IAT
• Pressure ratio depending on IAT 2
• Driver torque request
• Driver torque request Eco mode - AT
• Driver torque request Eco mode - AT - 2
• Driver torque request Sport mode - AT
• Driver torque request Sport mode - AT - 2
• Driver torque request Eco mode
• Driver torque request Normal mode - MT
• Driver torque request Sport mode
• CAT temperature sensor characterization
• Torque limiter for selected gear
• Torque limiter for selected gear - AT
• Start of injection
• Maximum upper tolerance intake pressure protection
• Torque limit table for IAT sensor
• Lower pressure control threshold
• Torque limiter to prevent preignition
• Torque limiter in recovery mode
• Torque limiter in recovery mode 2
• Upper engine rpm threshold for diagnostic control
• Upper pressure control threshold
• Turbocharger volumetric efficiency
• Wastegate duty-cycle

固件标识 (11)

ECU 说明

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

获取该车辆的文件

读写此 ECU 的工具

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 购买 The Genius OBD + Bench € 2.500 购买

其他 BMW

→ 所有 ECU BMW