BMW MOTORRAD F 750 GS 18->20 57kW

ECU BOSCH ME17.2.4 BMS-MP · 77 CV (57 kW) · 853 cc · Benzina aspirato

ECU 数据库BMW MOTORRAD › BMW MOTORRAD F 750 GS 18->20 57kW

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 21 固件版本

车辆数据

品牌BMW MOTORRAD
型号F 750 GS
发动机18->20 57kW
原厂功率77 CV / 57 kW
排量853 cc
燃料Benzina aspirato
车辆类型Moto

ECU

制造商BOSCH
型号ME17.2.4 BMS-MP
存储 / EPROMMICRO ST TRICORE - 32768 - 400000

可用的调校选项:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Advance at idle speed - warm up
  • Optimal spark timing/MBT
  • Advance at part load
  • Advance at part load - warm up
  • Automatic stability control 1
  • Automatic stability control 2
  • Automatic stability control 3
  • Automatic stability control 4
  • Automatic stability control 5
  • Advance full load
  • Advance full load - warm up
  • Dynamic traction control
  • Dynamic traction control 2
  • Dynamic traction control 3
  • Dynamic traction control 4
  • Dynamic traction control 5
  • Exhaust valve management
  • Exhaust valve management - limiter
  • Factor to correct fuel delivery system
  • Engine torque reducing factor depending on engine speed
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 3
  • Injection correction cilinder 1
  • Injection correction cilinder 2
  • Rpm threshold fuel cut
  • Idle throttle angle correction for ECT sensor
  • Advance limiter for component protection 1
  • Advance limiter lower motor temperature threshold
  • Advance limiter upper motor temperature threshold
  • Torque limiter
  • Lambda efficiency
  • Exhaust valve opening limit
  • RPM Limiter
  • RPM Limiter 2
  • RPM Limiter for gear downshift
  • RPM limiter in limp mode
  • RPM limiter - N
  • Lambda driver wish
  • Lambda driver wish 2
  • Maximum indicated torque
  • Optimal engine moment
  • Specific injection pressure
  • Air mass flow
  • Exhaust gas temperature sensor
  • Throttle angle limitation
  • Throttle angle limitation 2
  • Throttle angle management
  • Cooling fan activation
  • Front tire circumference
  • Rear tire circumference

固件标识 (21)

硬件号软件号 (chip)版本升级软件ECU
00003064050000000030650E0000 1.95.007000041F00E0009 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.009000041F0120000 BOSCH ME17.2.4 BMS-MP
00003064050000000030650E0000 1.95.007000041F00E0005 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.0080000432F120002 BOSCH ME17.2.4 BMS-MP
0000306405000000003065100000 1.95.011000041F4100000 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.004000047CE120002 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.003000041F1120002 BOSCH ME17.2.4 BMS-MP
00003064050000000030650E0000 1.95.006000041F20E0009 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.008000041F1120000 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.004000041F0120001 BOSCH ME17.2.4 BMS-MP
00003064050000000030650D0000 1.95.006000041F00D0004 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.008000047CF120002 BOSCH ME17.2.4 BMS-MP
0000306405000000003065110000 1.95.008000041F0110000 BOSCH ME17.2.4 BMS-MP
0000306405000000003065100000 1.95.008000041F0100000 BOSCH ME17.2.4 BMS-MP
0000306405000000003065110000 1.95.010000041F4110000 BOSCH ME17.2.4 BMS-MP
0000306405000000003065100000 1.95.002000041F2100000 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.011000041F0120002 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.004000041F2120000 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.002000041F4120002 BOSCH ME17.2.4 BMS-MP
0000306405000000003065120000 1.95.003000041F2120002 BOSCH ME17.2.4 BMS-MP
0000306405000000003065110000 1.95.006000041F2110000 BOSCH ME17.2.4 BMS-MP

ECU 说明

MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 35kW reduced power version file.