BENTLEY CONTINENTAL GT Mk2 FACELIFT 6.0L W12 48V TWINTURBO 522kW/700HP ME17.1.6

ECU BOSCH ME17.1.6 · 710 CV (522 kW) · 6000 cc · Benzina sovralimentato

ECU 数据库BENTLEY › BENTLEY CONTINENTAL GT Mk2 FACELIFT 6.0L W12 48V TWINTURBO 522kW/700HP ME17.1.6

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 4 固件版本

车辆数据

品牌BENTLEY
型号CONTINENTAL GT Mk2 FACELIFT
发动机6.0L W12 48V TWINTURBO 522kW/700HP ME17.1.6
原厂功率710 CV / 522 kW
排量6000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号ME17.1.6
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Desired pressure ratio
  • Exhaust gas temperature
  • Factor for reducing maximum filling
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management
  • Turbocharger volumetric efficiency

固件标识 (4)

硬件号软件号 (chip)版本升级软件ECU
1.00.00307C906023AL 1464 BOSCH ME17.1.6
1.00.01107C906023K 6514 BOSCH ME17.1.6
1.00.00407C906023L 5706 BOSCH ME17.1.6
1.00.00207C906023BG 1348 BOSCH ME17.1.6

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata