ECU 数据库 ›
AUDI › AUDI TT (8S/FV) 2.5L L5 20V TFSI RS 294kW/394HP MED17.1.62
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 17 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | TT (8S/FV) |
| 发动机 | 2.5L L5 20V TFSI RS 294kW/394HP MED17.1.62 |
| 原厂功率 | 400 CV / 294 kW |
| 排量 | 2500 cc |
| 燃料 | Benzina sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | MED17.1.62 |
| 存储 / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
可用的调校选项:
- Engine ignition timing versus temperature
- Base timing
- Advance at idle speed
- Optimal spark timing/MBT
- Advance correction
- Knock correction advance max
- Boost pressure limit control
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Compression ratio for turbocharger protection
- Compression ratio limiting for compressor depending on IAT sensor
- Exhaust gas temperature
- Factor for reducing maximum filling
- Engine idle in Park position
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- L
- Torque limiter
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- LG/V
- Maximum permitted engine speed for manual gear selection
- Boost pressure linearization
- Knock detection factor
- Speed limiter
- Maximum torque in Sport mode
- Maximum engine torque at crank shaft
- Throttle air mass flow calculation
- Max torque profile for gearbox protection - AT
- Optimal engine moment
- Relative permissible torque from the pedal position in torque limitation
- Pressure ratio depending on IAT
- Maximum pressure ratio limit depending on temperature
- % relative air filling limit depending on IAT
- Driver torque request
- Driver torque request 2
- Driver torque request AWD
- Torque limiter for selected gear
- Throttle angle management
固件标识 (17)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.47.004 | 8S0907404E 0005 |
BOSCH MED17.1.62 |
| — | — |
1.47.008 | 8S0907404E 0006 |
BOSCH MED17.1.62 |
| — | — |
1.47.005 | 8S0907404G 0005 |
BOSCH MED17.1.62 |
| — | — |
1.47.007 | 8S0907404J 0004 |
BOSCH MED17.1.62 |
| — | — |
1.47.008 | 8S0907404E 0003 |
BOSCH MED17.1.62 |
| — | — |
1.47.007 | 8S0907404G 0004 |
BOSCH MED17.1.62 |
| — | — |
1.47.023 | 8S0907404E 0002 |
BOSCH MED17.1.62 |
| — | — |
1.47.004 | 8S0907404G 0002 |
BOSCH MED17.1.62 |
| — | — |
1.47.005 | 8S0907404K 0001 |
BOSCH MED17.1.62 |
| — | — |
1.47.009 | 8S0907404A 0004 |
BOSCH MED17.1.62 |
| — | — |
1.47.019 | 8S0907404F 0005 |
BOSCH MED17.1.62 |
| — | — |
1.47.006 | 8S0907404A 0010 |
BOSCH MED17.1.62 |
| — | — |
1.00.002 | 8S0907404L 0001 |
BOSCH MED17.1.62 |
| — | — |
1.47.009 | 8S0907404A 0007 |
BOSCH MED17.1.62 |
| — | — |
1.94.012 | 8S0907404H 0003 |
BOSCH MED17.1.62 |
| — | — |
1.47.007 | 8S0907404A 0006 |
BOSCH MED17.1.62 |
| — | — |
1.47.012 | 8S0907404H 0002 |
BOSCH MED17.1.62 |
ECU 说明
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
