AUDI TT (8N) 1.8L 20V TURBO 176KW/236HP ME7.5

ECU BOSCH ME7.5 · 239 CV (176 kW) · 1800 cc · Benzina sovralimentato

ECU 数据库AUDI › AUDI TT (8N) 1.8L 20V TURBO 176KW/236HP ME7.5

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 1 固件版本

车辆数据

品牌AUDI
型号TT (8N)
发动机1.8L 20V TURBO 176KW/236HP ME7.5
原厂功率239 CV / 176 kW
排量1800 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.5
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • P
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow (diagnostic)
  • Air mass flow

固件标识 (1)

硬件号软件号 (chip)版本升级软件ECU
02612080861037375111 1.42.0138N0906018CA 0010 BOSCH ME7.5

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop