ECU 数据库 ›
AUDI › AUDI SQ7 4.0L V8 TDI 320kW/429HP MD1CP014
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 6 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | SQ7 |
| 发动机 | 4.0L V8 TDI 320kW/429HP MD1CP014 |
| 原厂功率 | 435 CV / 32 kW |
| 排量 | 4000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | MD1CP014 |
| 存储 / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Maximum engine boost pressure F (atmospheric pressure)
- Maximum engine boost pressure F (atmospheric pressure) 2
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Boost pressure 5
- Boost pressure 6
- Boost pressure 7
- Protection for cylinder head overheating
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Max accepted exhaust gas temperature value before turbine 3
- Protection for engine overheating
- Injection period
- Injection period 10
- IF1
- Injection period 13
- Injection opening time related to inj. pressure
- J
- Torque limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max torque profile - AT
- Maximum torque value for reverse gear
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request
- Start of injection
- Start of injection 2
- Torque limiter for the APS/BPS
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
固件标识 (6)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.02.010 | 4M0997409 1004 |
BOSCH MD1CP014 |
| — | — |
1.02.008 | 4M0907409 0005 |
BOSCH MD1CP014 |
| — | — |
1.02.008 | 4M0997409 1005 |
BOSCH MD1CP014 |
| — | — |
1.02.017 | 4M0907409 0004 |
BOSCH MD1CP014 |
| — | — |
1.02.009 | 4M0907409 0008 |
BOSCH MD1CP014 |
| — | — |
1.02.009 | 4M0907409F 0002 |
BOSCH MD1CP014 |
ECU 说明
Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
