AUDI Q7 (4M) 3.0L V6 24V TDI E-tron 190kW/255HP MD1CP004

ECU BOSCH MD1CP004 · 258 CV (19 kW) · 3000 cc · Diesel sovralimentato

ECU 数据库AUDI › AUDI Q7 (4M) 3.0L V6 24V TDI E-tron 190kW/255HP MD1CP004

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 3 固件版本

车辆数据

品牌AUDI
型号Q7 (4M)
发动机3.0L V6 24V TDI E-tron 190kW/255HP MD1CP004
原厂功率258 CV / 19 kW
排量3000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MD1CP004
存储 / EPROMMicro BGA FREESCALE - 8192 Kbit - 800000

可用的调校选项:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • Boost pressure 5
  • Boost pressure 6
  • Boost pressure 7
  • Boost pressure 8
  • Boost pressure 9
  • Protection for cylinder head overheating
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Max accepted exhaust gas temperature value before turbine 3
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Injection period
  • IF1
  • Injection period 2
  • Injection period 20
  • Injection period 21
  • Injection period 22
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period 7
  • Injection period 8
  • Injection period 9
  • Injection period limit
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Injection 1
  • Injection 2
  • Injection 3
  • J
  • Injection 6
  • L
  • Torque limiter
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Lambda value of the smoke limitation 3
  • Speed limiter
  • Max torque profile - AT
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for exhaust gas temperature before turbine 2
  • Protection for fuel overheating
  • Protection for oil overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure
  • Driver torque request
  • Driver torque request 2
  • Driver torque request 3
  • Start of injection
  • Start of injection 2
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
1.02.0384M0907401A 0009 BOSCH MD1CP004
1.02.0174M0997401 1002 BOSCH MD1CP004
1.02.0124M0907401A 0010 BOSCH MD1CP004

ECU 说明

Microprocessor BGA FREESCALE SPC57xxx This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata